Theory of surface deposition from boundary layers containing condensable vapour and particles
نویسندگان
چکیده
Theory of surface deposition from boundary layers containing condensable vapour and particles J. C. NEU, A. CARPIO, AND L. L. BONILLA Department of Mathematics, University of California at Berkeley, Berkeley, CA 94720, USA Departamento de Matemática Aplicada, Universidad Complutense de Madrid, E-28040 Madrid, Spain G. Millán Institute of Fluid Dynamics, Nanoscience and Industrial Mathematics, Universidad Carlos III de Madrid, 28911 Leganés, Spain
منابع مشابه
Gas-to-particle conversion in the atmosphere: II. Analytical models of nucleation bursts
Simple models are developed to describe the formation of particles from condensable vapours in different atmospheric circumstances. The models are designed for use in large scale global transport models, where sub-grid descriptions are required for such phenomena. We solve the evolution equation for the density of a condensable vapour. When the concentration of existing aerosol is low, nucleati...
متن کاملSynthesis of carbon nano structures on Fe/Cu/AI and Al/Steel by thermal chemical vapour deposition method
Using C2H2, 112 and As gases at 550'C, carbon nanotubes were fabricated on the surfaces of twosubstrates coated by nano thin layers of metal catalysts by DC magnetron sputtering. AYStamless steel andFe/CteAl, by thermal chemical vapor deposition (TCVD) The surface properties of the substrates wereparticularly investigated, and the effect of treatment of the substrates on the CNT's growth is cri...
متن کاملParticle Size Controls on Water Adsorption and Condensation Regimes at Mineral Surfaces
Atmospheric water vapour interacting with hydrophilic mineral surfaces can produce water films of various thicknesses and structures. In this work we show that mineral particle size controls water loadings achieved by water vapour deposition on 21 contrasting mineral samples exposed to atmospheres of up to ~16 Torr water (70% relative humidity at 25 °C). Submicrometer-sized particles hosted up ...
متن کاملTwo-Stage Chemical Deposition of Oxide Films
Two-stage chemical deposition (TSCD) technique is used to produce ZnO, Mn2O3 and NiO films on soda-lime glass (SL-G) from an aqueous solution of zinc, manganese and nickel complex, respectively. The TSCD method enables the deposition of metal oxide thin films with a thickness which can be controlled during the preparation procedure. The ZnO, Mn2O3 and NiO thin films were polycrystalline films w...
متن کاملInvestigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP)
Friction stir processing (FSP) was used for the fabrication of Al-B4C surface composite. Al-Mg-Si alloy was considered as the substrate and B4C particles were incorporated into the substrate by thermo-mechanical effect of FSP. The effect of tool dimensions and different rotational speeds on the microstructure and microhardness of the composite layers was evaluated and the optimum process parame...
متن کامل