Structural Behaviour of Fibrous Concrete Using Polypropylene Fibres

نویسنده

  • Ankit Sharma
چکیده

The aim of the present study is to investigate the effect of variation of polypropylene fibres ranging from 0.1% to 0.4% along with 0.8% steel fibres on the behaviour of fibrous concrete. The mechanical properties of the concrete such as compressive and tensile strength have been investigated. The result shows that addition of polypropylene fibre has a little effect on the compressive strength, but there was significant increase in the tensile strength with increase in fibre volume fraction. The present investigation shows an increase of 47% of split tensile strength and 50% of flexural strength. The result shows that ultimate load mainly depended on percentage volume fraction of fibre.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of polypropylene fibres in concrete: Microstructure after fire testing and chloride migration

Explosive spalling of pieces of concrete from the heated surface is considered to be the most dangerous effect of damage of concrete subjected to intense fire attack, especially when it occurs in restricted areas such as underground tunnels. Recent investigations have revealed that the amount of explosive spalling and the extent of cracking can considerably be reduced by use of suitable amount ...

متن کامل

Influence of Nano-silica and Polypropylene Fibers on Bond Strength of Reinforcement and Structural Lightweight Concrete (RESEARCH NOTE)

In this study, first by surveythe parameters affecting the compressive strength, such as water to cement ratio, cementgrade, silica fume to cement percentage, and the various ratios oflight weight aggregate LECA, to total aggregate, Taguchi method is used, to test 9 mix designsobtained the mix design optimization. Since lightweight concrete is brittle like normal concrete, to resolve this probl...

متن کامل

Compressive Strength Index of Crimped Polypropylene Fibres in High Strength Cementitious Matrix

Submitted: Jul 2, 2013; Accepted: Aug 18, 2013; Published: Aug 29, 2013 Abstract: Experimental Studies were conducted to analyse the influence of crimped polypropylene fibres in cementitious matrix. The compressive strength of concrete with the addition crimped polypropylene fibres for relative volume fractions of 0.1% and 0.3% were evaluated in concrete with water cement ratio as low as 0.3. H...

متن کامل

Effect of Polypropylene Fibers on Strength and Thermal Resistance of Concrete

In this paper, the effect of Polypropylene Fibers added to concrete on strength and thermal resistance of high strength concrete has been investigated. Therefore, five tests have been carried out to reach this goal which it includes; effect of weight percent of polypropylene fibers on mechanical properties of concrete, effect of fiber’s length on the strength of high strength concrete, effect o...

متن کامل

Effect of Adding Nanoclay on the Mechanical Behaviour of Fine-grained Soil Reinforced with Polypropylene Fibers

In this study the performance of clay nano-particles on the soil reinforced with Polypropylene fibers (PP-fiber) has been investigated. Also a series of investigations concerning the effect of random orientation of fibers on the engineering behaviour of soil were conducted. Soil mixtures were modified with varying percentages of nanoclay and Fibers. Unconfined compressive strength (UCS), Compac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013