Parallel particle impactor – novel size-selective particle sampler for accurate fractioning of inhalable particles

نویسندگان

  • S Trakumas
  • E Salter
چکیده

Adverse health effects due to exposure to airborne particles are associated with particle deposition within the human respiratory tract. Particle size, shape, chemical composition, and the individual physiological characteristics of each person determine to what depth inhaled particles may penetrate and deposit within the respiratory tract. Various particle inertial classification devices are available to fractionate airborne particles according to their aerodynamic size to approximate particle penetration through the human respiratory tract. Cyclones are most often used to sample thoracic or respirable fractions of inhaled particles. Extensive studies of different cyclonic samplers have shown, however, that the sampling characteristics of cyclones do not follow the entire selected convention accurately. In the search for a more accurate way to assess worker exposure to different fractions of inhaled dust, a novel sampler comprising several inertial impactors arranged in parallel was designed and tested. The new design includes a number of separated impactors arranged in parallel. Prototypes of respirable and thoracic samplers each comprising four impactors arranged in parallel were manufactured and tested. Results indicated that the prototype samplers followed closely the penetration characteristics for which they were designed. The new samplers were found to perform similarly for liquid and solid test particles; penetration characteristics remained unchanged even after prolonged exposure to coal mine dust at high concentration. The new parallel impactor design can be applied to approximate any monotonically decreasing penetration curve at a selected flow rate. Personal-size samplers that operate at a few L/min as well as area samplers that operate at higher flow rates can be made based on the suggested design. Performance of such samplers can be predicted with high accuracy employing wellestablished impaction theory.

منابع مشابه

Characterization of Total and Size-Fractionated Manganese Exposure by Work Area in a Shipbuilding Yard

BACKGROUND Shipbuilding involves intensive welding activities, and welders are exposed to a variety of metal fumes, including manganese, that may be associated with neurological impairments. This study aimed to characterize total and size-fractionated manganese exposure resulting from welding operations in shipbuilding work areas. METHODS In this study, we characterized manganese-containing p...

متن کامل

Research Papers Involving the Tsi Respicontm Sampler

Six inhalable aerosol samplers were evaluated experimentally as area samplers using monodisperse solid particles with aerodynamic diameters ranging from 5 to 68 mm. Sampler performance and inside particle loss at two test wind speeds (0.55 and 1.1 m/sec) and three wind orientations (0, 90, and 180 degrees) were investigated. The six inhalable aerosol samplers tested were a RESPICONTM sampler, a...

متن کامل

Comparison of a passive aerosol sampler to size-selective pump samplers in indoor environments.

The objective of this work was to investigate the ability of the Wagner-Leith passive aerosol sampler to measure indoor exposures over periods of 24 hours to 2 weeks. An automated analysis technique was developed so that lower aerosol concentrations could be sampled over shorter time periods. A test of the new analytical method against a manual method showed good agreement. The passive sampler ...

متن کامل

Performance of personal inhalable aerosol samplers in very slowly moving air when facing the aerosol source.

While personal aerosol samplers have been characterized primarily based on wind tunnel tests conducted at relatively high wind speeds, modern indoor occupational environments are usually represented by very slow moving air. Recent surveys suggest that elevated levels of occupational exposure to inhalable airborne particles are typically observed when the worker, operating in the vicinity of the...

متن کامل

Exposure Hazard to Bisphenol A for Labor and Particle Size Distribution at Polycarbonate Molding Plants

BACKGROUND This research provides an insight into exposure information and particle size distributions of Bisphenol A (BPA), a common environmental hormone, at polycarbonate (PC) molding plants in southern Taiwan. METHODS The inhalable dust sampler as IOM and the micro-orifice uniform deposition impactor (MOUDI) were used for samples collection to evaluate the level and particle size distribu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

متن کامل
عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009