Laser-treated substrate with nanoparticles for surface-enhanced Raman scattering.
نویسندگان
چکیده
A rapid and simple approach to fabricate a large area of nanostructured substrate for surface-enhanced Raman scattering (SERS) is reported. Gold nanoparticles ranging from 10 to 40 nm in diameter uniformly distributed on a silicon substrate were obtained by annealing the gold film precoated on the silicon substrate with UV nanosecond (ns) laser pulses. The gold nanoparticles were formed by surface tension of the melted gold layer heated by ns laser pulses. The enhancement factor of the SERS substrate for Rhodamine 6G at 632.8 nm excitation was measured to be higher than 10(5). The proposed technique provides the opportunity to equip a functional microchip with SERS capability of high sensitivity and chemical stability.
منابع مشابه
Surface Enhanced Raman Scattering of Crystal Violet with Low Concentrations Using Self-Assembled Silver and Gold-Silver Core-Shell Nanoparticles
The active substrates in surface enhanced Raman scattering (SERS) spectroscopy were prepared through self-assembly of nanoparticles on functionalized glasses. Colloidal silver nanoparticles (Ag NPs) were prepared chemically in two different sizes by reduction of AgNO3 using trisodium citrate and sodium borohydride. Gold–silver core–shell nanoparticles were also prepared to compare between the o...
متن کاملUnification of Surface Enhanced Raman Spectroscopy of Dyes Using One Pot Synthesized Stabilized Ag Nanoparticles
stabilized Ag Nanoparticles (NPs) were synthesized using Lee-Meisel method under three different conditions in an oil bath. UV-Vis spectroscopy of the Ag NPs showed a Localized Surface Plasmon (LSP) band around 430 nm, indicating Ag NPs had a size range around 40 nm. To fabricate a surface Enhanced Raman Spectroscopy (SERS) substrate, LSP properties of Ag NPs was employed with the goal of detec...
متن کاملFemtosecond and nanosecond laser fabricated substrate for surface-enhanced Raman scattering.
We report a simple and repeatable method for fabricating a large-area substrate for surface-enhanced Raman scattering. The substrate was processed by three steps: (i) femtosecond (fs) laser micromachining and roughening, (ii) thin-film coating, and (iii) nanosecond laser heating and melting. Numerous gold nanoparticles of various sizes were created on the surface of the silicon substrate. The 3...
متن کاملAssembly of Silver Nanocube Clusters and Tuning of Surface Plasmon Resonances for Surface- Enhanced Raman Scattering
Title of Document: ASSEMBLY OF SILVER NANOCUBE CLUSTERS AND TUNING OF SURFACE PLASMON RESONANCES FOR SURFACEENHANCED RAMAN SCATTERING Seung Yong Lee, Doctor of Philosophy, 2012 Directed By: Professor Oded Rabin, Department of Materials Science and Engineering To prepare surface-enhanced Raman scattering (SERS) substrate with metal nanoparticle clusters, various deposition methods were used: (1)...
متن کاملLaser direct write of silver nanoparticles from solution onto glass substrates for surface-enhanced Raman spectroscopy
A solution based laser direct write technique for patterning of glass substrates with silver nanoparticles is presented. Photoreduction of an AgNO3 solution, by nanosecond UV laser pulses, produces a source solution of silver particles. A glass substrate is then inserted into this solution and the laser is scanned over its surface. Laser-induced fragmentation of the silver particles in the solu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics letters
دوره 35 7 شماره
صفحات -
تاریخ انتشار 2010