SRM control algorithm for electric vehicles drives applications
نویسندگان
چکیده
In the article author describes a measurements of generated torque and flux in SRM for different rotor positions. The measurements are compared with simulations results. At the end of the article author describes a algorithm of realization traction drive characteristic required by mechanical vehicles. Streszczenie. W artykule autor prezentuje wyniki pomiarów momentu oraz strumienia elektromagnetycznego dla różnych położeń wirnika. Wyniki pomiarów porównano z wynikami otrzymanymi drogą symulacji komputerowych. Przedstawiony jest także algorytm realizacji charakterystyki trakcyjnej wymaganej do napędy pojazdów mechanicznych. (Algorytm realizacji charakterystyki trakcyjnej wymaganej do napędy pojazdów mechanicznych)
منابع مشابه
Application of Speed Estimation Techniques for Induction Motor Drives in Electric Traction Industries and vehicles
Induction motors are the most commonly used in the traction industries and electric vehicles, due to their low primary cost, low maintenance costs, and good performance. Speed identification is needed for the induction motor drives. However, using of speed sensors in the induction motor drives is associated with problems such as, extra cost, reduced reliability, added mounting space, etc.. Ther...
متن کاملA Novel Approach to Design the Dual Rotor Switched Reluctance Motor Based Electric Vehicles
Electric and hybrid electric vehicles are attractive candidates for sustainable transportation due to its higher efficiency and low emission. The critical choice on the electric motors is its capability of motoring and regenerative braking characteristics. Switched reluctance machines are viable candidate as with proper control and extended constant power range operation replacing the multi-gea...
متن کاملVibration Control of In-Wheel SRM for Electric Vehicle Applications
The Switched Reluctance Motor (SRM) processes great application potential in In-Wheel Motor (IWM) electric vehicles (EV). However the problem of vibration and noise is always a disadvantage of this kind of motor. By utilizing the analytical Fourier fitting method, a convenience method for modeling In-Wheel Switched Reluctance Motor (IW SRM) is proposed for EV applications. And the negative vibr...
متن کاملA Novel Intelligent Energy Management Strategy Based on Combination of Multi Methods for a Hybrid Electric Vehicle
Based on the problems caused by today conventional vehicles, much attention has been put on the fuel cell vehicles researches. However, using a fuel cell system is not adequate alone in transportation applications, because the load power profile includes transient that is not compatible with the fuel cell dynamic. To resolve this problem, hybridization of the fuel cell and energy storage device...
متن کاملOptimal Design of Axial Flux Permanent Magnet Synchronous Motor for Electric Vehicle Applications Using GAand FEM
Axial Flux Permanent Magnet (AFPM) machines are attractive candidates for Electric Vehicles (EVs) applications due to their axial compact structure, high efficiency, high power and torque density. This paper presents general design characteristics of AFPM machines. Moreover, torque density of the machine which is selected as main objective function, is enhanced by using Genetic Algorithm (GA) a...
متن کامل