Fabry-Perot diaphragm fiber-optic sensor.
نویسندگان
چکیده
The general theory of a diaphragm fiber-optic sensor (DFOS) is proposed. We use a critical test to determine if a DFOS is based on Fabry-Perot interference or intensity modulation. By use of the critical test, this is the first design, to the best of our knowledge, of a purely Fabry-Perot DFOS, fabricated with microelectromechanical system technology, and characterized as an audible microphone and ultrasonic hydrophone with orders of improvement in signal-to-noise ratio.
منابع مشابه
Fabry-Perot Diaphragm Fiber Optic Sensor (DFOS) for Acoustic Detection
The diaphragm fiber optic sensor (DFOS) solely based on Fabry-Perot multiple beam interference has been designed and fabricated with Micro-electric mechanical system (MEMS) technology. The silicon diaphragm with an embossed center was designed with an interference gap width kept accurately. The DFOS is verified to be truly and purely of Fabry-Perot type via a critical test. Parallel testing of ...
متن کاملCenter embossed diaphragm design guidelines and Fabry-Perot diaphragm fiber optic sensor
This research established the design guidelines for center embossed diaphragms for micro-diaphragm fiber type sensors. Following the guidelines, a center embossed diaphragm fiber optic sensor (CE-DFOS) based on Fabry–Perot interference was designed and fabricated with micro-electro-mechanical system (MEMS) technology. The CE-DFOS was experimentally verified to have the designed intrinsic freque...
متن کاملDiaphragm design guidelines and an optical pressure sensor based on MEMS technique
The design guidelines for micro diaphragm-type pressure sensors have been established by characterization of the relationships among diaphragm thickness, side length, sensitivity, and resonant frequency. According to the study, the thickness need to be thin and the side length need to be small in order to get the sensitive diaphragm with high resonant frequency. A Fabry–Perot based pressure sen...
متن کاملDesign of Optical Fiber Fabry-Perot Sensors Based on Intensity and Phase with Parallel Processing
For fiber Fabry-Perot sensor vulnerable to external parameters such as electromagnetic, noise and displacement impact, reducing the problem resilience, research and design new fiber Fabry-Perot sensor with parallel processing capabilities based on the intensity and phase of perception. First, according to various types of external parameters and the degree of interference, established the inten...
متن کاملChitosan Layer Fabry - Perot Interferometer - Based Optical Fiber Sensor for Cadmium Ion Detection
Optical sensors based on Fabry-Perot interferometer to detect cadmium ions is proposed. The sensor was fabricated by coating the tip of the optical fiber by chitosan. The two chitosan surfaces serve as mirrors which form a Fabry-Perot interferometer. The characterization results indicate that the sensor has a linear response with sensitivity of 0.0884 dBm/ppm with a correlation factor of 0.9665...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Applied optics
دوره 46 31 شماره
صفحات -
تاریخ انتشار 2007