Capacity fade study of lithium-ion batteries cycled at high discharge rates
نویسندگان
چکیده
Capacity fade of Sony US 18650 Li-ion batteries cycled using different discharge rates was studied at ambient temperature. The capacity losses were estimated after 300 cycles at 2C and 3C discharge rates and were found to be 13.2 and 16.9% of the initial capacity, respectively. At 1C discharge rate the capacity lost was only 9.5%. The cell cycled at high discharge rate (3C) showed the largest internal resistance increase of 27.7% relative to the resistance of the fresh cells. The rate capability losses were proportional with the increase of discharge rates. Half-cell study and material and charge balances were used to quantify the capacity fade due to the losses of primary active material (Liþ), the secondary active material (LiCoO2/C)) and rate capability losses. It was found that carbon with 10.6% capacity loss after 300 cycles dominates the capacity fade of the whole cell at high discharge rates (3C). A mechanism is proposed which explains the capacity fade at high discharge rates. # 2003 Elsevier Science B.V. All rights reserved.
منابع مشابه
Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملDevelopment of Lifetime Prediction Model of Lithium-Ion Battery Based on Minimizing Prediction Errors of Cycling and Operational Time Degradation Using Genetic Algorithm
Accurate lifetime prediction of lithium-ion batteries is a great challenge for the researchers and engineers involved in battery applications in electric vehicles and satellites. In this study, a semi-empirical model is introduced to predict the capacity loss of lithium-ion batteries as a function of charge and discharge cycles, operational time, and temperature. The model parameters are obtai...
متن کاملVoltage increase of aqueous lithium-ion batteries by Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic
In this research, a lithium ion conducting lithium aluminum germanium phosphate (LAGP) glass-ceramic with a formula of Li1.5Al0.5Ge1.5(PO4)3 was synthesized by melt-quenching method and subsequent crystallization at 850 °C for 8 h. The prepared glass-ceramic was characterized using X-ray diffraction analysis (XRD) and field emission scanning electron microscopy (FESEM). The XRD patterns exhib...
متن کاملCycle-Life Characterization of Automotive Lithium-Ion Batteries with LiNiO2 Cathode
A set of lithium-ion cells containing a LiNi0.8Co0.15Al0.05O2-based positive electrode and a graphite negative electrode were cycled nonintrusively at high power 5C rate and elevated temperature 40°C . The aged cells were characterized at prescribed cycle numbers up to 5250 cycles by a three-electrode cell, capacity measurement, and electrochemical impedance spectroscopy EIS . Excellent cyclabi...
متن کاملStudies on capacity fade of lithium-ion batteries
The capacity fade of Sony 18650S Li-ion cells has been analyzed using cyclic voltammetry, impedance spectroscopy and electron Ž . Ž . Ž . probe microscopic analysis EPMA . The surface resistance at both the positive LiCoO and negative carbon electrodes were found to 2 increase with cycling. This increase in resistance contributes to decreased capacity. Impedance data reveal that the interfacial...
متن کامل