Misalignment detection for friction stir welding or Enabling seam tracking for friction stir welding
نویسندگان
چکیده
This paper describes a technique for determining the position of the friction stir welding (FSW) tool with respect to the weld seam during welding. This technique is proposed for online misalignment detection or as a position estimator for in-process tracking of the weld seam for FSW.
منابع مشابه
Automatic seam-tracking of friction stir welded T-joints
In this research, a method for implementing automatic seam-tracking for friction stir welding, referred to hear as WeaveTrack, is presented. In this extrumum-seeking control technique, the tool weaves back and forth during welding to maintain the location where axial force is greatest, which is shown to be the center of the weld. Results demonstrate the effectiveness of this technique in tracki...
متن کاملSeam-Tracking for Friction Stir Welded Lap Joints
This article presents a method for automatic seam-tracking in friction stir welding (FSW) of lap joints. In this method, tracking is accomplished by weaving the FSW tool back-and-forth perpendicular to the direction of travel during welding and monitoring force and torque signals. Research demonstrates the ability of this method to automatically track weld seam positions. Additionally, tensile ...
متن کاملThermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam (TECHNICAL NOTE)
Friction stir welding (FSW) can be defined as a green technology, because the consumption of energy during this process is less than other welding methods. In addition, during the process there is no gas, filler material or other consumables. It should be noted that, complex curved shapes are now commonly used in different industries in a bid to have lightweight structures. According to the abo...
متن کاملProcess planning for rapid manufacturing of plastic injection mold for short run production
This thesis presents a process planning methodology for a rapid injection mold tool manufacturing system that involves additive and subtractive techniques, whereby slabs are sequentially bonded and milled using layered tool paths. Mold tools are grown in a bottom up fashion, eliminating the need for multi-axis machining operations (beyond three axes) and allowing small features in deep cavities...
متن کاملA Review of Numerical Analysis of Friction Stir Welding
Friction stir welding is a relatively new solid-state joining technique which is widely adopted in different industry fields to join different metallic alloys that are hard to weld by conventional fusion welding. Friction stir welding is a highly complex process comprising several highly coupled physical phenomena. The complex geometry of some kinds of joints and their three dimensional nature ...
متن کامل