Temperature-induced excess mortality in Moscow, Russia.

نویسندگان

  • Boris Revich
  • Dmitri Shaposhnikov
چکیده

After considering the observed long-term trends in average monthly temperatures distribution in Moscow, the authors evaluated how acute mortality responded to changes in daily average, minimum and maximum temperatures throughout the year, and identified vulnerable population groups, by age and causes of death. A plot of the basic mortality-temperature relationship indicated that this relationship was V-shaped with the minimum around 18 degrees C. Each 1 degree C increment of average daily temperature above 18 degrees C resulted in an increase in deaths from all non-accidental causes by 2.8%, from coronary heart disease by 2.7%, from cerebrovascular diseases by 4.7%, and from respiratory diseases by 8.7%, with a lag of 0 or 1 day. Each 1 degrees C drop of average daily temperature from +18 degrees C to -10 degrees C resulted in an increase in deaths from all non-accidental causes by 0.49%, from coronary heart disease by 0.57%, from cerebrovascular diseases by 0.78%, and from respiratory diseases by 1.5%, with lags of maximum association varying from 3 days for non-accidental mortality to 6 days for cerebrovascular mortality. In the age group 75+ years, corresponding risks were consistently higher by 13-30%. The authors also estimated the increase in non-accidental deaths against the variation of daily temperatures. For each 1 degrees C increase of variation of temperature throughout the day, mortality increased by 0.3-1.9%, depending on other assumptions of the model.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Seasonal variation in mortality in Moscow.

BACKGROUND Seasonal variation in mortality has been investigated in many countries but not, until recently, in Russia. There are some grounds for suspecting that it may differ in Russia from what is seen in western countries. This paper explores patterns of seasonal variation in mortality in Moscow between 1993 and 1995. METHODS Analysis was based on individual data on deaths occurring in Mos...

متن کامل

Optical Analyzer for Continuous Monitoring of Dissolved Oxygen in Aviation Fuel and Other Non-aqueous Media

A special sensitive element based on the novel composite material was created. The sensor has a linear calibration and is resistant to aliphatic hydrocarbons, in particular aviation fuel. A low cost and easy-to-implement method for calibrating the sensor was proposed. Temperature dependence of the oxygen mass transfer coefficient kL was measured for aviation fuel TS-1 (Russi...

متن کامل

Electrical properties of UHMWPE/graphite nanoplates composites obtained by in-situ polymerization method

There are described nanocomposites based on ultra high molecular weight polyethylene and graphite nanoplates prepared by in-situ polymerization method. It is carried out a comprehensive study of electric properties of these composites, including direct current (dc) and alternating current (ac) properties. There is explored dependence of the conductivity and dielectric permeability on filler con...

متن کامل

Examination of Temperature In uence on Wide-Angle Paratellurite Crystal Acousto-Optic Filters Operation

Paratellurite Crystal Acousto-Optic Filters Operation S.N. Mantsevich, O.I. Korablev, Yu.K. Kalinnikov, A.Yu. Ivanov and A.V. Kiselev Space Research Institute (IKI), 84/32, Profsoyuznaya, 117997, Moscow, Russia Faculty of Physics, Moscow State University, GSP-2, Leninskiye Gory, 119992, Moscow, Russia Moscow Institute of Physics and Technology (MIPT), 9, Institutsky dr., 141700, Dolgoprudny, Mo...

متن کامل

The use of optimization algorithm for assessing effects of Carboxyl Functionalized MWCNTs on the productivity of nidltrusion process

Among the several available techniques to produce the braided composite rods for construction industry, nidltrusion process is becoming the most widespread and cost-effective continuous processing technique. The work mentions the influence of carboxyl functionalized multiwalled carbon nanotubes (MWCNTs) on the maximum speed of manufacturing process. The epoxy polymer is diglycidyl ether of bisp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • International journal of biometeorology

دوره 52 5  شماره 

صفحات  -

تاریخ انتشار 2008