Fabrication of Polypyrrole Nanowire and Nanotube Arrays
نویسندگان
چکیده
Large area highly uniform and ordered polypyrrole nanowire and nanotube arrays were fabricated by chemical oxidation polymerization with the help of a porous anodic aluminium oxide (AAO) template. Under 0.2 moL/L pyrrole (H2O) and 0.2 moL/L FeCl3 (H2O) pattern, polypyrrole nanowire arrays were obtained after 2.0 hours polymerization reaction in a two-compartment reaction cell. When the reaction was stopped after 15 minutes, polypyrrole nanotube arrays have been formed. The diameter, length and density of compositive nanowires and nanotubes could be controlled by parameters of AAO template.
منابع مشابه
Fabrication and optical properties of gold nanotube arrays
Arrays of gold nanotubes with polypyrrole cores were grown on glass substrates by electrodeposition into thin film porous alumina templates. Measurements of optical transmission revealed strong extinction peaks related to plasmonic resonances, which were sensitive to the polarization state and angle of incidence. On prolonging the electrodeposition of gold, the polypyrrole core became fully enc...
متن کاملFabrication of silica nanotube arrays from vertical silicon nanowire templates.
A simple thermal oxidation-etching process was developed to translate vertical silicon nanowire arrays into silica nanotube arrays. The obtained nanotubes perfectly retain the orientation of original silicon nanowire arrays. The inner tube diameter ranges from 10 to 200 nm. High-temperature oxidation produces relative thick, rigid, and pinhole-free walls that are made of condensed silica. This ...
متن کاملDetection of napropamide by microwave resonator sensor using carbon nanotube – polypyrrole- chitosan layer
This paper presents the design and fabrication of proximity coupled feed disk resonator coated with Multi Walled Carbon Nanotubes (MWCNTs) and Polypyrrole-Chitosan (PPy-CHI) layers as a napropamide sensor. Computer Simulation Technology (CST) microwave studio was used to obtain the best design of disk resonator and feed line position in 5 GHz resonant frequency. Also, MWCNTs - PPy-CHI layers we...
متن کاملArrays of indefinitely long uniform nanowires and nanotubes.
Nanowires are arguably the most studied nanomaterial model to make functional devices and arrays. Although there is remarkable maturity in the chemical synthesis of complex nanowire structures, their integration and interfacing to macro systems with high yields and repeatability still require elaborate aligning, positioning and interfacing and post-synthesis techniques. Top-down fabrication met...
متن کاملSynthesis and Growth Mechanism of Ni Nanotubes and Nanowires
Highly ordered Ni nanotube and nanowire arrays were fabricated via electrodeposition. The Ni microstructures and the process of the formation were investigated using conventional and high-resolution transmission electron microscope. Herein, we demonstrated the systematic fabrication of Ni nanotube and nanowire arrays and proposed an original growth mechanism. With the different deposition time,...
متن کامل