Global recrystallisation model of low carbon sheet steels with different cementite contents
نویسندگان
چکیده
This paper discusses the influence of Particle Stimulated Nucleation (PSN) on the overall process of nucleation and subsequent grain growth in low carbon (LC) steels and proposes a global recrystallisation kinetics model based on fundamental physical metallurgy principles. The model takes into account the cementite content, which is dependent on the nominal carbon content, and the second phase particle size. The deformation field around cementite particles and its influence on recrystallisation processes is analysed. Finally, experimental evidence is given to show the accuracy of the theoretical predictions.
منابع مشابه
Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr
Cementite dissolution in hypereutectoid steels containing Cr is analyzed using dilatometry combined with the consideration of the carbon content in the austenite. The results suggest that the austenite transformed from the mixture of ferrite and cementite can be approximated to have a carbon content corresponding to equilibrium with ferrite. The overall dissolution behavior of cementite is desc...
متن کاملStudy of the effect of nano-sized precipitates on the mechanical properties of boron-added low-carbon steels by neutron scattering techniques
Small-angle neutron scattering (SANS) and neutron powder diffraction (ND) techniques were used to study quantitatively the effect of nano-sized precipitates and boron addition on the mechanical properties of low-carbon steels. SANS was used to evaluate nano-sized precipitates, smaller than about 600 A in diameter, and ND was used to determine the weight fraction of the cementite precipitates. F...
متن کاملThe Precipitation of Carbides during Tempering of High Carbon Martensite*
perature range between 260° and 360°C. Jack showed that thin platelets of cementite formed at the beginning of this stage(10). In high carbon steels, the transformation twin interfaces are potent nucleation sites for the cementite formation and the cementite is related to the ferrite by Bagaryatskii's orientation relationship(2)(3)(11). Although there is no direct evidence of its existence in s...
متن کاملISIJ International, Vol. 47 (2007), No. 5, pp. 769–771
The decomposition of austenite to ferrite or cementite begins at the equilibrium phase boundary of austenite/ (ferrite austenite) or austenite/(cementite austenite) in binary Fe–C phase diagram. The temperature values on the phase boundaries of austenite/(ferrite austenite) and austenite/(cementite austenite) at a certain carbon content are called Ae3 and Acm temperatures of the steel, respecti...
متن کاملUltra-Fine Grained Dual-Phase Steels
This paper provides an overview on obtaining low-carbon ultra-fine grained dual-phase steels through rapid intercritical annealing of cold-rolled sheet as improved materials for automotive applications. A laboratory processing route was designed that involves cold-rolling of a tempered martensite structure followed by a second tempering step to produce a fine grained aggregate of ferrite and ca...
متن کامل