Turn-by-turn Data Acquisition and Post-processing for the Diamond Booster and Storage Ring
نویسنده
چکیده
The Diamond booster and storage ring are equipped with Libera Electron Beam Position Processors with turnby-turn capabilities. We describe here the turn-by-turn data acquisition system and the software used for postprocessing the beam data. The signals from the Libera boxes are acquired and controlled with EPICS and then transferred to the MATLAB environment via the MATLAB Channel Access or LabCA. Here they are postprocessed using MATLAB capabilities and dedicated software linked to MATLAB. Examples of data acquired and measurements performed during Diamond booster and storage ring commissioning are reported.
منابع مشابه
Further Optimisation of the Diamond Light Source Injector
Optimisation of the Diamond Light Source injector has continued since user operation started in January 2007. Beam losses have been minimised by injector tuning and stabilisation, and high level software has been developed to characterise booster and injection parameters. Operation in top-up and single bunch storage ring fill modes are reported, and low-energy linac fault-mode studies are detai...
متن کاملCommissioning of the Swiss Light Source
The Swiss Light Source (SLS) at the Paul Scherrer Institute (PSI) consists of a turn key 100 MeV linac, a novel type of booster synchrotron and a 12-TBA storage ring providing 5 nm·rad natural emittance at 2.4 GeV. The SLS project was approved by Swiss Government in Sept. 1997. By June 1999 the building was finished. Linac and booster commissioning concluded by April, resp. Sept. 2000. First be...
متن کاملA Turn-by-turn Vertical Profile Monitor
A turn-by-turn vertical beam profile monitor has been developed at the Cornell Electron Storage Ring (CESR). The instrument optically images the vertical beam distribution with an array of optical fibers that transport visible synchrotron radiation to an array of photo-multiplier tubes. Each PMT signal is recorded by a turn-by-turn data acquisition system. With this instrument, we compare profi...
متن کاملStator Turn-to-Turn Fault Detection of Induction Motor by Non-Invasive Method Using Generalized Regression Neural Network
Condition monitoring and protection methods based on the analysis of the machine's current are widely used according to non-invasive characteristics of current transformers. It should be noted that, these sensors are installed by default in the machine control center. On the other hand, condition monitoring based on mathematical methods has been proposed in literature. However, they are model b...
متن کاملRealtime Tune Measurements in Slow-cycling Accelerators
Measurement and control of the tunes, coupling, and chromaticities in storage rings is essential to efficient operation of these accelerators. Yet it has been very difficult to make reliable realtime measurements of these quantities. We have built and commissioned the microprocessorbased Generic Finite State Data Acquisition (GFSDA) system. GFSDA provides turn-by-turn data acquisition and analy...
متن کامل