Simulations of Vapor/Ice Dynamics in a Freeze-Dryer Condenser
نویسندگان
چکیده
Freeze-drying is a low-pressure, low-temperature condensation pumping process widely used in the manufacture of pharmaceuticals for removal of solvents by sublimation. Key performance characteristics of a freezedryer condenser are largely dependent on the vapor and ice dynamics in the low-pressure environment. The main objective of this work is to develop a modeling and computational framework for analysis of vapor and ice dynamics in such freeze-dryer condensers. The direct Simulation Monte Carlo (DSMC) technique is applied to model the relevant physical processes that accompany the vapor flow in the condenser chamber. Low-temperature water vapor molecular model is applied in the DSMC solver SMILE to simulate the flowfield structure. The developing ice front is tracked based on the mass flux computed at the nodes of the DSMC surface mesh. Verification of ice accretion simulations has been done by comparison with analytical free-molecular solutions. Simulations of ice buildup on the coils of a laboratory-scale dryer have been compared with experiments. The comparison shows that unsteady simulations are necessary to reproduce experimentally observed icing structures. The DSMC simulations demonstrate that by tailoring the condenser topology to the flow-field structure of the water vapor jet expanding into a low-pressure reservoir, it is possible to significantly increase water vapor removal rates and improve the overall efficiency of freeze-drying process.
منابع مشابه
Sperm freeze-drying; effects on sperm parameters
Today, sperm cryopreservation is a routine practice in infertility clinics. One of the alternative methods to preserve sperm is freeze-drying. This process consists of three steps. The first step is sample freezing, during which the solvent is separated from the solvent. Water forms ice crystals and the solute is placed between the ice crystals. Freezing may be done in a separate device or in a...
متن کاملLong Range Corrections to the Vapor-Liquid Equilibrium and Surface Tension of Methane with NVT Molecular Dynamics Simulations
متن کامل
Heat Transfer in Freeze-Drying Apparatus
Freeze-drying is a process used to remove water (or another solvent) from a frozen product, thus increasing its shelf-life. It is extensively used in pharmaceuticals manufacturing, to recover the active pharmaceutical ingredient (and the excipients) from an aqueous solution, as well as in some food processes, because of the low operating temperatures that allow preserving product quality. Moreo...
متن کاملA novel method of cinnamon oil nanocapsulation in core-shell chitosan-alginate by freeze dryer
The objective of this work was to characterize the cinnamon oil nanocapsule that contained alginate-chitosan as coating agents. In this work, cinamonn oil loaded chitosan nanoparticles (CS-alginate NP-cinamonn) are prepared by a two-step process including oil/water emulsion and ionic gelation. In this study, cinamon as a core material was nanoencapsulated with chitosan alginate at a ratio of 1:...
متن کاملCFD Simulation and Optimization of Factors Affecting the Performance of a Fluidized Bed Dryer
Computational Fluid Dynamics (CFD) is a computational technology that enables researchers to study the dynamics of things that flow. By using CFD, it is possible to build a computational model that represents a system under study. It not only predicts fluid flow behavior, but also the transfer of heat, mass, phase change, chemical reaction, mechanical movement, and stress or deformation of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010