Fault Tolerant Control of Four Switch Three Phase Inverter Fed Induction Motor Drive System
نویسنده
چکیده
In this paper a new switching technique for Direct Torque Control (DTC) fault tolerant induction motor drive is presented, if one inverter leg is completely lost due to such abnormal condition, this system modifies the switching table of DTC system using the available stator voltage vectors in two phase mode with Four Switch Three Phase Inverter (FSTPI) topology to track the stator flux reference and directly control the torque and maintain the performance of induction motor as in the Six Switch Three Phase Inverter (SSTPI) mode. An experimental setup has been built in Laboratory using the interface circuit Advenchtech PCI 1711 to test the performance of the proposed method and the experimental results give a good agreement with the simulation results.
منابع مشابه
Sensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives
The sensorless model predictive force control (SMPFC) is a strong method for controlling the drives of three-phase 4(6)-switch inverter linear induction motors. This kind of inverter can be employed for fault tolerant control in order to solve the problem of open/short circuit in 6-switch inverters (B6). This paper proposed a method for the SMPFC of a linear induction motor (LIM) with a 4-switc...
متن کاملAn improved fault-tolerant control scheme for PWM inverter-fed induction motor-based EVs.
This paper proposes an improved fault-tolerant control scheme for PWM inverter-fed induction motor-based electric vehicles. The proposed strategy deals with power switch (IGBTs) failures mitigation within a reconfigurable induction motor control. To increase the vehicle powertrain reliability regarding IGBT open-circuit failures, 4-wire and 4-leg PWM inverter topologies are investigated and the...
متن کاملEmbedded Four Switch Three Phase Inverter Fed Induction Motor Drive
The objective of the paper is to develop a microcontroller controlled four switch three phase inverter (FSTPI) to drive three phase induction motor with minimum hardware. This inverter uses four switches instead of conventional six switches, it has lesser switching losses, lower electromagnetic interference (EMI), less complexity of control algorithms, robust control and reduced circuit complex...
متن کاملModeling and Analysis of Multi-Phase Inverter Fed Induction Motor Drive with Different Phase Numbers
This paper presents a modeling and analysis of multi-phase inverter fed multi-phase induction motor drive with different number of phases. Multiphase induction motor drives possess several advantages over conventional three-phase drives such as lower torque pulsation, fault tolerance, stability, high efficiency and lower current ripple and reduced current per phase without increasing voltage pe...
متن کاملFour-Switch Inverter-Fed Direct Torque control of Three Phase Induction Motor
In this paper, four-switch inverter fed direct torque control three phase Induction Motor drive is presented. A triangular wave is used as dither signal of minute amplitude (for torque hysteresis band and flux hysteresis band respectively) in the error block. This method minimizes flux and torque ripple in a Four-Switch inverter fed induction motor drive while the dynamic performance is not aff...
متن کامل