Quality Improvement of Pumping Element used in Diesel Fuel Injection Pump
نویسنده
چکیده
Pumping element is an important component of a diesel fuel injection system. This project was carried out in Bosch. Ltd Adugodi, Bangalore. Using Pareto analysis, defects with highest percentage rejections are found. Barrel bore taper more and Honing Lines rejections were 2.5% and 1.8% respectively in the year 2013. Root cause analysis is done using Shainin Technique. Reason for the cause is analyzed and the solution is found. The solution is optimized by analyzing the Physics behind the problem. Optimized solution is validated for a calculated batch over particular period. After validation the solution is incorporated for daily production. The rejections were brought down by more than half.
منابع مشابه
Research and Assessment of Applying Dimethyl Ether “DME” Extracted from Natural Gas “Ng”, on Diesel Engine as a Clean Fuel (TECHNICAL NOTE)
Due to the shortage of liquid hydrocarbon fuels for compression ignition engines, researchers have constantly been looking for alternative fuels. Recently, dim ethyl ether (DME) with its interesting properties, such as high cetane number and low exhaust emission has drawn a lot of interst as a suitable fuel for diesel engines. The main objective of this study was to assess the potentials and fe...
متن کاملEmission Reduction Strategies for Small Single Cylinder Diesel Engine Using Valve Timing and Swirl Ratio
Small diesel engines are widely used for commercial vehicle and passenger car applications due to their higher torque requirements, fuel economy, and better thermal efficiency. These engines are exposed to different operating and environmental conditions and hence emissions from these engines are erratic. Strategies are required to enhance performance and reduce engine-out emissions considering...
متن کاملNumerical study of the effect of fuel injection timing on the ignition delay, performance parameters and exhaust emission of gas/dual fuel diesel engine using Computational Fluid Dynamics
Today, due to the various usage of compression ignition engines in urban transportation, as well as the need to reduce exhaust emissions and control fuel consumption, the use of alternative fuels has become common in diesel engines. Gaseous fuel is one of the most common alternative fuels that can be used in diesel engines. The utilization of alternative fuels in compression ignition engines re...
متن کاملExperimental study of the diesel injector nozzle sediment effect on fuel spray behavior
High pressure amount of fuel in new generation diesel engines’ injector equipped with multiple and small nozzle holes has created significant improvement in the outgoing spray behavior and engine performance. On the other hand, poor fuel quality and injector nozzle embedded in high temperature combustion chamber form fundamental deposits on the nozzle leading to fuel spray inappropriate behavio...
متن کاملImproving the NOx-BSFC Trade Off of a Turbocharged Large Diesel Engine Using Performance Simulation
The purpose of this study is to determine the optimum intake valve closing time of a large diesel engine having lower fuel consumption and lower NOx emission. The performance simulation has been conducted for this purpose, and a phenomenological combustion model is verified by experimental data of heat release rate and NOx emission in order to enhance the prediction quality of the performance s...
متن کامل