The Heat Transfer Analysis of The Hyperbaric Oxygen Chamber with Cooling System
نویسندگان
چکیده
The overheated problem is the important issue in the operation of the hyperbaric oxygen chamber. A cooling system is applied to reduce the temperature of the hyperbaric oxygen chamber. We present the finite element method to build three types cooling system for solving the overheated phenomena in this problem. For achieving the better cooling way, this investigation considers different types of cooling channel and pressure of the chamber in this simulated process. These simulated results show that the proposed method is accurate, stable, and efficient for handling the heat transfer problems. We expect that the proposed study can apply to ameliorate the overheated problem effectively.
منابع مشابه
A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System
In the presented research, heat transfer of a mobile electrolyte alkaline fuel cell (AFC) (which the electrolyte has cooling role of system) has been considered. Proper control volumes of system with specific qualification have been chosen. Consequently, heat and mass transfer in control volumes have been assessed. Considerations on them and contributed models lead to approve a double tube heat...
متن کاملExperimental Investigation of Heat Transfer Enhancement in a Finned U-Shaped Heat Pipe of CPU Cooling System Using Different Fluids
This paper experimentally studies the heat absorption performance of a heat sink with vertical embedded heat pipes in the aluminum blade. The cooling system with embedded heat pipes distributes heat from the CPU to both the base plate and the heat pipes, and then transfer heat from fins to the Environment. The thermal resistance and heat transfer coefficient are evaluated for natural convection...
متن کاملFree convection in a 3D chamber with local cooling and heating
This paper modeled heating air of a room through examining free convection in a 3D chamber. The chamber had cold and hot sources with Tc and Th temperatures, respectively. Its other walls were adiabatic. This study aimed at predicting effect of temperature difference, displacement of hot and cold sources and their aspect ratio on flow field, temperature and heat transfer rate. To conduct the st...
متن کاملEnhancement Performance New Generation of CPU Cooling System Using Water-AL2O3 Nanofluid
By increase in the power of computer systems and enhanced power of the components and their temperature, including the central processing unit (CPU), cooling just by the air is not effective and there is need for more powerful systems to cool down and increase the power of the cooling system. In this article simulation of the heat exchanger material of the fluid cooling system has been studied ...
متن کاملEntropy generation due to unsteady hydromagnetic Couette flow and heat transfer with asymmetric convective cooling in a rotating system
Entropy generation in an unsteady hydromagnetic Couette flow of a viscous incompressible electrically conducting fluid between two infinite horizontal parallel plates in a rotating system have been analyzed. Both the lower and upper plates of the channel are subjected to asymmetric convective heat exchange with the ambient following the Newton's law of cooling. A numerical solution for governin...
متن کامل