A comparison of illumination geometry-based methods for topographic correction of QuickBird images of an undulant area

The high spatial resolution of QuickBird satellite images makes it possible to show spatial variability at fine details. However, the effect of topography-induced illumination variations become more evident, even in moderately sloped areas. Based on a high resolution (1 m) digital elevation model generated with high-frequency real-time kinematic global position system measurements, this study assessed topographic effects on QuickBird images of an undulant area (with a maximum slope of 7.4°) under different illumination and ground conditions. For land surfaces that were characterized by a non-Lambertian reflection, significant bidirectional variations in spectral radiances were found in all bands. The effectiveness of four illumination geometry-based topographic correction methods was evaluated. The results indicated that the empirical correction was the most effective method for all spectral bands in both solar and view directions, while the cosine correction gave the worst results. The C correction (in the solar direction) and the Minnaert correction reduced topographic effects, but not as effectively as the empirical correction. For the Lambertian, topographic effects were substantial only in the near infrared band in the solar direction. Bidirectional variations of spectral radiances in other bands and/or view directions were minimal and topographic corrections may not be necessary. None of these methods significantly changed the spatial variability of spectral radiances, although the histogram distributions were greatly modified by the cosine correction and the Minnaert correction. © 2007 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS). Published by Elsevier B.V. All rights reserved.