Integration of multimode waveguides and micromirror couplers in printed circuit boards using laser ablation
نویسندگان
چکیده
Integration of optical interconnections on a Printed Circuit Board (PCB) is very challenging, as it should remain compatible with existing PCB manufacturing technology. We will describe the use of laser ablation, already used in PCB manufacturing for microvia’s, as a suitable technique for the fabrication of multimode waveguides and micromirrors to provide optical coupling. The focus is on ablation of waveguides using a frequency tripled Nd-YAG laser and on ablation of 45 facets using a KrF excimer laser. It is shown that these structures can be defined in one single processing step, resulting in a very accurate alignment.
منابع مشابه
Board-Level Three-Dimensional Optical Interconnects
We introduce here a simple method of integrating 45° total internal reflection micro-mirrors with polymer optical waveguides by an improved tilted beam photolithography on printed circuit boards to provide surface normal light coupling between waveguides and optoelectronic devices for optical interconnects. De-ionized water is used to couple ultraviolet beam through the waveguide core polymer l...
متن کاملOptical Backplane Waveguides with 850 nm Wavelength Multimode VCSELs
An optical backplane concept based on polymer waveguides, well suited to overcome the communication bottleneck caused by conventional printed circuit boards is investigated. Attenuation coefficients are determined for several waveguides on different backplanes and it is shown that 10 Gbit/s data transmission at a bit error rate of 10 is possible both for waveguides of large (250 × 200 μm ) and ...
متن کاملDevelopment of Electro-optical Pcbs with Polymer Waveguides
We have developed technologies to embedded high-speed polymer optical interconnects on printed circuit boards for 850 nm applications. In this paper, we show results of fabricating optical-PCBs on a production scale panels in a modern HDI-PCB (high-density interconnect-PCB) process environment. Impacts on board design and manufacturing were studied with the developed optical technology verifier...
متن کاملبهینه سازی و افزایش پهنای باند پیوننده خط شاخه ای موجبری مجتمع شده در زیرلایه به روش حداقل مربعات
Directional couplers are passive devices which are used as power dividers and combiners in microwave, millimeter and terahertz systems. By the use of substrate integrated waveguides (SIW) for the design of such devices, the advantages of waveguide and printed circuit (PC) technologies are utilized simultaneously, such as low cost, small size, low transmission and radiation losses. In this paper...
متن کاملMultimode Emissions from MEH-PPV Blended with Polystyrene Film Waveguides
In the context of conjugated polymers, especially those of the poly (phenylenevinylene) (PPV) family, which are promising candidates as emission material in light emitting devices such as LEDs, field effect transistors and photovoltaic devices, we have, in the present study, prepared MEH-PPV [Poly [2- methoxy-5-(2’-ethyl-hexyloxy)-1,4-phenylen-evinylene] of low molecular weight and low polydisp...
متن کامل