Reflectiondistributionsof texturedmonocrystalline silicon: implications for silicon solar cells
نویسندگان
چکیده
A common misconception is that alkaline textured silicon solar cell surfaces are characterised by features that are pyramidal and bounded by {111} planes. In preference to the typical approach of observing scanning electron microscope images, we analyse reflection distributions from various pyramidal textures and find that {111} faceted pyramids are a poor approximation to the features on such surfaces. We conclude that features are hillocks, with an octagonal base. Furthermore, the characteristic base angle of the texture depends on the etchant and is closer to 50–52 than the commonly accepted value of 54.74 . Analyses of antireflection, light trapping, photogeneration and surface recombination properties of textured surfaces should take this feature morphology into account. The base angle has a strong influence on the hemispherical reflectance of the textured surface, with higher angles resulting in reduced reflectance. The influence of this reflection enhancement upon device performance is smallest when an optimised antireflection coating is applied; compared with an array of {111} faceted pyramids, a hillock morphology with 50 base angle results in a 0.2% reduction in photogenerated current in a typical cell. Additionally, as base angle is reduced, an encapsulant of increasingly higher refractive index is required to drive internal reflection at the air–glass interface of light initially reflected from the cell surface. The development of texturing processes resulting in higher base angles is encouraged. Copyright © 2012 John Wiley & Sons, Ltd.
منابع مشابه
Study the Effect of Silicon Nanowire Length on Characteristics of Silicon Nanowire Based Solar Cells by Using Impedance Spectroscopy
Silicon nanowire (SiNW) arrays were produced by electroless method on polycrystalline Si substrate, in HF/ AgNO3 solution. Although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. In order to study the influence of etching time (which affects the SiNWs length) on d...
متن کاملOptimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution
In this paper, the morphology of chemically etched silicon with various concentration is reported. The surface of Silicon (100) has pyramidal structures which can be used for anti-reflection applications in solar cells. Pyramidal structures can capture incident sun light therefore can enhance the efficiency of silicon solar cells. The structure of silicon pyramid was studied using scanni...
متن کاملEffect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics
Nanowires (NWs) are recently used in several sensor or actuator devices to improve their ordered characteristics. Silicon nanowire (Si NW) is one of the most attractive one-dimensional nanostructures semiconductors because of its unique electrical and optical properties. In this paper, silicon nanowire (Si NW), is synthesized and characterized for application in photovoltaic device. Si NWs are ...
متن کاملProbing the Nature of Annealing Silicon Carbide Samples for Solar Cell
SiC powder preparation using Sol-Gel method. The size of nano-particles grows as the temperature exceeds 900° C. Size of probable agglomerations produced, is approximately less than 50nm. The surface is suitable to be used for dye solar cells. SiC emission occurs at wavelength area of 11.3μm or wave number area of 884.95 cm-1. In this paper probing the nature of annealed SiC samples in mixture,...
متن کاملDesign of Silicon Nano-Bars Anti-Reflection Coating to Enhance Thin Film Solar Cells Efficiency
In this paper a novel anti-reflection (AR) coating based on silicon nano-bars is designed and its impact on the performance of crystalline silicon (c-Si) thin-film solar cells is extensively studied. Silicon nano-bars with optimized size and period are embedded on top of the active layer, under a 100nm Si3N4 layer. As a result of the proposed layer stack, an inhomogeneous intermediate layer wit...
متن کامل