On Code Generation for Rapid Prototyping Using CDIF

Scheduling Strategies and Estimations for Concept-Oriented Rapid Prototyping

In this paper scheduling strategies for a rapid prototyping system are discussed. Our rapid prototyping system is able to use several CASE-tools and generate code for models of heterogenous domains. By using the emerging CASE data interchange format CDIF the model data of CASE-tools is represented tool-independent. This tool-independent layer serves as a basis for simulation and code generation...

Using CDIF for Concept-Oriented Rapid Prototyping of Electronic Systems

In this paper an open environment for heterogeneous system design is presented supporting all design phases. Our approach separates front-end tools with structural and behavioral modeling from back-end tools for analysis, simulation and emulation. This separation is realized with the emerging CASE data interchange format CDIF. Though CDIF is intended as an interchange format for the interchange...

Rapid prototyping eingebetteter elektronischer Systeme auf Basis des CDIF-Datenaustauschformats

Implementing Rapid Prototyping Using CNC Machining (CNC-RP) Through a CAD/CAM Interface

This paper presents the methodology and implementation of a rapid machining system using a CAD/CAM interface. Rapid Prototyping using CNC Machining (CNC-RP) is a method that has been developed which enables automatic generation of process plans for a machined component. The challenge with CNC-RP is not the technical problems of material removal, but with all of the required setup, fixture and t...

Rapid Prototyping of Distributed Real-Time Embedded Systems Using the AADL and Ocarina

Building Distributed Real-Time Embedded systems requires a stringent methodology, from early requirements capture to full implementation. However, there is a strong link between the requirements and the final implementation (e.g. scheduling, resource dimensioning). Therefore, a rapid prototyping process based on automation of tedious and error-prone tasks (analysis, code generation) is required...