Investigation of the Hydrolysis of Perovskite Organometallic Halide CH3NH3PbI3 in Humidity Environment
نویسندگان
چکیده
Instability of emerging perovskite organometallic halide in humidity environment is the biggest obstacle for its potential applications in solar energy harvest and electroluminescent display. Understanding the detailed decay mechanism of these materials in moisture is a critical step towards the final appropriate solutions. As a model study presented in this work, in situ synchrotron radiation x-ray diffraction was combined with microscopy and gravimetric analysis to study the degradation process of CH3NH3PbI3 in moisture, and the results reveal that: 1) intermediate monohydrated CH3NH3PbI3·H2O is detected in the degradation process of CH3NH3PbI3 and the final decomposition products are PbI2 and aqueous CH3NH3I; 2) the aqueous CH3NH3I could hardly further decompose into volatile CH3NH2, HI or I2; 3) the moisture disintegrate CH3NH3PbI3 and then alter the distribution of the decomposition products, which leads to an incompletely-reversible reaction of CH3NH3PbI3 hydrolysis and degrades the photoelectric properties. These findings further elucidate the picture of hydrolysis process of perovskite organometallic halide in humidity environment.
منابع مشابه
افزایش پایداری سلولهای خورشیدی با استفاده از لایههای جاذب پروسکایتی CH3NH3PbI3 آلاییده با برم
The CH3NH3PbI3 is one of the most widely used and famous lead halide perovskite absorber layer for using in perovskite solar cells. One of the ways to deal with the instability problem of this perovskite structure in environmental condition is bromide doping in this composition. In this work, the structural and optical properties of the bromide doped CH3NH3PbI3 absorber layers were studied as w...
متن کاملEfficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Poor stability of organic-inorganic halide perovskite materials in humid condition has hindered the success of perovskite solar cells in real applications since controlled atmosphere is required for device fabrication and operation, and there is a lack of effective solutions to this problem until now. Here we report the use of lead (II) thiocyanate (Pb(SCN)2) precursor in preparing perovskite s...
متن کاملStable and durable CH3NH3PbI3 perovskite solar cells at ambient conditions.
Degradation of metal-organic halide perovskites when exposed to ambient conditions is a crucial issue that needs to be addressed for commercial viability of perovskite solar cells (PSCs). Here, a concept of encapsulating CH3NH3PbI3 perovskite crystals with a multi-functional graphene-polyaniline (PANI) composite coating to protect the perovskite against degradation from moisture, oxygen and UV ...
متن کاملHumidity versus photo-stability of metal halide perovskite films in a polymer matrix.
Despite the high efficiency of over 21% reported for emerging thin film perovskite solar cells, one of the key issues prior to their commercial deployment is to attain their long term stability under ambient and outdoor conditions. The instability in perovskite is widely conceived to be humidity induced due to the water solubility of its initial precursors, which leads to decomposition of the p...
متن کاملSynergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells
Organometal lead halide perovskites have been widely used as the light harvester for high-performance solar cells. However, typical perovskites of methylammonium lead halides (CH3NH3PbX3, X=Cl, Br, I) are usually sensitive to moisture in ambient air, and thus require an inert atmosphere to process. Here we demonstrate a moisture-induced transformation of perovskite crystals in a triple-layer sc...
متن کامل