Colloidal Processing of Ceramics
نویسنده
چکیده
Colloidal processing of ceramics is reviewed with an emphasis on interparticle forces, suspension rheology, consolidation techniques, and drying behavior. Particular attention is given to the scientific concepts that underpin the fabrication of particulate-derived ceramic components. The complex interplay between suspension stability and its structural evolution during colloidal processing is highlighted.
منابع مشابه
Synthesis and Processing of Ferroelectric Pzt Powders, Ceramics and Films
In this chapter, various synthesis routes for PZT powders and fabrication processing techniques for PZT ceramics and films are reviewed. Emphasis is placed on chemical routes, especially the hydrothermal synthesis of PZT powders. The principles of the colloidal chemistry in ceramic suspension and its application to the colloidal processing of ceramics and films, especially when using sub-micron...
متن کاملPowder Processing Science and Technology for Increased Reliability
Issues concerning powder consolidation methods compatible with the colloidal approach and issues associated with other powder processing steps, viz., den-sification and microstructural control, are presented with regard to research directions leading to more reliable ceramics. 1. Introduction With their multiplicity of elemental combinations and crystal structures, ceramics exhibit unique prope...
متن کاملSlow-Crack-Growth Behavior of Zirconia-Toughened Alumina Ceramics Processed by Different Methods
A study of slow-crack propagation in zirconia-toughened alumina (ZTA) ceramics is presented. Different ZTA composites, using either unstabilized or yttria-stabilized zirconia, have been tested. The materials were prepared in the range 0–15 vol% ZrO2, using two processing methods: powder mixing and a modified colloidal route. Crack propagation tests have been conducted for crack velocities from ...
متن کاملInnovative Approach to Synthesis of Pb(Mg1/3Nb2/3)O3 Based Materials using Colloidal Interactions
A new approach to the synthesis of Pb(Mg1/3Nb2/3)O3 (PMN) based materials is presented. By manipulating the colloidal interactions, the designed self-assembled aggregates are formed, which enable the synthesis of PMN based materials in a single-annealing step. Furthermore the as prepared ceramics are sintered at 200 K lower temperatures compared to conventionally used methods and exhibit excell...
متن کاملProcessing and Characterization of Nanocrystalline Mica Glass-Ceramics
In order to fabrication of transparent glass-ceramics with Li-mica nano crystals, the glasses with chemical composition of 94.9 mass% Li(1+x)Mg3AlSi3(1+x)F2 (x=0.5) with 5.1 mass% MgF2 were crystallized. The glasses were fabricated via the conventional melt-quenching technique. Mica crystals were precipitated in the glass phase by later heat treatment. Glass samples had glass transition tempera...
متن کامل