Design a Low Voltage- Low Offset Class AB Op-Amp
نویسندگان
چکیده
A new design approach for three-stage operational amplifiers (op-amps) is proposed. It allows to actually implement a symmetrical push-pull class-AB amplifier output stage for wellestablished three-stage amplifiers using a feedforward transconductance stage. Compared with the conventional design practice, the proposed approach leads to a significant improvement of the symmetry between the positive and the negative op-amp step response, resulting in similar values of the positive/negative settling time. The new approach proves to be very useful in order to fully exploit the potentiality allowed by the op-amp in terms of speed performances. Design examples in a commercial 0.35-μm CMOS prove the effectiveness of theproposed strategy. Keywords—Low-voltage op amp, design , optimum design
منابع مشابه
Design of a Low Power Class AB Two-Stage Op-Amp with Symmetrical Slew Rate
The operational amplifier is perhaps the most useful integrated device in existence today. It is widely used in analogue computers, simulation systems and in a variety of electronic applications such as filtering, buffering and comparison of signal levels. In this paper, the different schemes of power-efficient class AB two-stage op-amps using a current replication branch and adaptive loads wer...
متن کاملLow Power Low Voltage OTA using Adaptive Bias
The very fast growing market of portable equipment is increasing interest in low power integrates circuit. So, designing low power integrated circuits requires reduction of supply voltages and interconnection parasitic to minimum but reduction in supply voltage implies series of problems in circuit design. To overcome these issues, an Ultra low power low voltage two stage class AB CMOS fully di...
متن کاملDesign of accurate analog circuits for low voltage low power CMOS systems
In low voltage low power CMOS systems the high input offset and noise voltages of MOSFETs and the moderate gain of op amps limit the accuracy of analog circuits. In this paper we summarize the results ofour recent research on the dynamic op amp matching which is a very attractive technique for the implementation of accurate analog circuits in low voltage low power CMOS systems because, in compa...
متن کاملA Novel Low Voltage, Low Power and High Gain Operational Amplifier Using Negative Resistance and Self Cascode Transistors
In this work a low power, low voltage and high gain operational amplifier is proposed. For this purpose a negative resistance structure is used in parallel with output to improve the achievable gain. Because of using self cascode transistors in the output, the proposed structure remains approximately constant in a relatively large output voltage swing causing an invariable gain. To evaluate the...
متن کاملA New Low-Voltage, Low-Power and High-Slew Rate CMOS Unity-Gain Buffer
Class-AB circuits, which are able to deal with currents several orders of magnitude larger than their quiescent current, are good candidates for low-power and high slew-rate analog design. This paper presents a novel topology of a class AB flipped voltage follower (FVF) that has better slew rate and the same power consumption as the conventional class-AB FVF buffer previously presented in liter...
متن کامل