An Analog Method for Measuring the Longitudinal Coupling Impedance of a Relativistic Particle Beam with Its Environment
نویسندگان
چکیده
The stability of a coasting beam against selfbunching (negative mass instability) may be expressed in terms of a beam coupling impedance. The impedance has contributions from self-fields, wall impedance, and curvature effects. This paper describes procedures for measuring the wall and curvature contributions to the coupling impedance by means of an analog in which the beam is replaced by a conductor propagating a TEM-like mode. Conditions are derived under which the measurements are valid, various measurement procedures are describe~ and results of the application of the method to the compressor of an electron ring accelerator are reported.
منابع مشابه
On the Sands and Rees Measurement Method of the Longitudinal Coupling Impedance
By means of a general theory we examine the Sands and Rees method of measurement of the longitudinal coupling impedance between a particle beam and the vacuum chamber components. We discuss the validity limits of the method in relation to the presence of the central wire which simulates the beam.
متن کاملCoupled Bending-Longitudinal Vibration of Three Layer Sandwich Beam using Exact Dynamic Stiffness Matrix
A Newtonian (vectorial) approach is used to develop the governing differential equations of motion for a three layer sandwich beam in which the uniform distribution of mass and stiffness is dealt with exactly. The model allows for each layer of material to be of unequal thickness and the effects of coupled bending and longitudinal motion are accounted for. This results in an eighth order ordina...
متن کاملبررسی اثر تزویج متقابل بر مشخصات تشعشعی یک آرایه آنتن مسطح محدود شامل پچ های مستطیلی
In this paper a novel method for computing the radiation pattern and also the input impedance of a planar rectangular micro-strip antenna array with consideration of mutual coupling and mutual impedance is presented. Each two triangles with a common edge make an Edge element or RWG. Any such edge element is considered as an infinitesimal dipole. The electrical currents over each dipole can be c...
متن کاملNumerical Calculation of Coupling Impedances in Kicker Modules for Non-Relativistic Particle Beams
Open boundary conditions. Since the source current, Eq. 1, extends from z = −∞ to +∞ whereas our computational domain is finite, one has to apply suitable boundary conditions (see also [2]). Consider some accelerator component, residing in a vacuum cavity with attached beam pipe of smaller cross section than the cavity. Generally, the transitions from the pipe to the module have to be included ...
متن کاملThree-Dimensional Simulation of Airflow and Nano-Particle Beam Focusing in Aerodynamic Lenses(RESEARCH NOTE)
In this paper airflow, nano-and micro-particle motions in an aerodynamic particle beam focusing system consisting of several lenses, a nozzle and the downstream chamber, was studied. A three-dimensional numerical simulation for the system was presented and the compressible airflow and thermal conditions in the aerodynamic lens system were evaluated. Dilute particle concentration was assumed so ...
متن کامل