Low-temperature fabrication of layered self-organized Ge clusters by RF-sputtering
نویسندگان
چکیده
In this article, we present an investigation of (Ge + SiO2)/SiO2 multilayers deposited by magnetron sputtering and subsequently annealed at different temperatures. The structural properties were investigated by transmission electron microscopy, grazing incidence small angles X-ray scattering, Rutherford backscattering spectrometry, Raman, and X-ray photoelectron spectroscopies. We show a formation of self-assembled Ge clusters during the deposition at 250°C. The clusters are ordered in a three-dimensional lattice, and they have very small sizes (about 3 nm) and narrow size distribution. The crystallization of the clusters was achieved at annealing temperature of 700°C.
منابع مشابه
Simulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملRF sputtering: A viable tool for MEMS fabrication
Fabrication of Micro-Electro-Mechanical-Systems (MEMS) requires deposition of films such as SiO2, Si3N4, ZnO, polysilicon, phosphosilicate glass (PSG), Al, Cr-Au, Pt, etc. for use as structural, sacrificial, piezoelectric and conducting material. Deposition of these materials at low temperature is desirable for fabricating sensors/actuators on temperature-sensitive substrates and also for integ...
متن کاملHybrid SnO2/TiO2 Nanocomposites for Selective Detection of Ultra-Low Hydrogen Sulfide Concentrations in Complex Backgrounds
In this paper, we present a chemiresistive metal oxide (MOX) sensor for detection of hydrogen sulfide. Compared to the previous reports, the overall sensor performance was improved in multiple characteristics, including: sensitivity, selectivity, stability, activation time, response time, recovery time, and activation temperature. The superior sensor performance was attributed to the utilizatio...
متن کاملTHE ANALYSIS OF STRUCTURE FOR THE MULTI-LAYERED OF Ge/TiO2 FILMS PREPARED BY THE DIFFERENTIAL PRRESSURE CO-SPUTTERING ANALIZA STRUKTURY WIELOWARSTWOWYCH FILMÓW Ge/TiO2 WYTWARZANYCH METODĄ RÓŻNICOWO-CIŚNIENIOWEGO WSPÓŁROZPYLANIA JONOWEGO
We tried to fabricate the Ge/TiO2 composite films with the differential pressure (pumping) co-sputtering (DPCS) apparatus in order to improve the optical properties. In the study, the micro structure of these thin films has been evaluated. TEM image revealed that the thin film was alternately layered with TiO2 and Ge, lattice fringes were observed both of Ge layer and TiO2 layer. There were por...
متن کاملEffect Of Zinc Oxide RF Sputtering Pressure on the Structural and Optical Properties of ZnO/PEDOT:PSS Inorganic/Organic Heterojunction
Zinc oxide nanostructures are deposited on glass substrates in the presenceof oxygen reactive gas at room temperature using the radio frequency magnetronsputtering technique. In this research, the effects of zinc oxide sputtering pressure on thenanostructure properties of the deposited layer are investigated. The deposition pressurevaries from 7.5 to 20.5 mTorr. AFM resu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 6 شماره
صفحات -
تاریخ انتشار 2011