Furanic Copolymers with Synthetic and Natural Phenolic Materials for Wood Adhesives - a Maldi Tof Study
نویسندگان
چکیده
The structure of traditional, linear phenol-formaldehyde (PF) resins and phenol-furfural (P-Furan) resins has been investigated by matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectroscopy. The structure of a variety of oligomers has been obtained and the structures present in each of the two types of resins related to the reagent used either formaldehyde or furfural. The oligomers type and species distribution appeared rather different for each case. Comparison of a P-Furan resin with a Mimosa tannin-Furan resin showed some differences. This latter shows a greater proportion of self-condensed fuanic oligomers due to the manner in which it is prepared starting from furfuryl alcohol. Several different TanninFuran oligomers were also observed by MALDI TOF analysis.
منابع مشابه
Tannin-Based Copolymer Resins: Synthesis and Characterization by Solid State 13C NMR and FT-IR Spectroscopy
In recent years, the interest for bio-sources is rising exponentially and tannins extracts are one of the most interesting, easily-available, phenolic building blocks. The condensed tannins or proanthocyanidins are already known for their polymerization chemistry, which is the basis for several natural-based materials (e.g., adhesives, foams). In the present work we aim to observe the behavior ...
متن کاملPacked bed techniques for accelerated aging of rum
Rum is a sugar cane spirit obtained by the distillation of molasses through yeast fermentation and subsequent aging in wooden barrels, where the spirit acquires its special flavor and aroma. Packed bed schemes were applied to the accelerated aging of rum samples. These involved maturation in contact with natural, toasted or chemically treated oak wood chips for 90 d and four secondary treatment...
متن کاملBiomimetic adhesive materials containing cyanoacryl group for medical application.
For underwater adhesives with biocompatible and more flexible bonds using biomimetic adhesive groups, DOPA-like adhesive molecules were modified with cyanoacrylates to obtain different repeating units and chain length copolymers. The goal of this work is to copy the mechanisms of underwater bonding to create synthetic water-borne underwater medical adhesives through blending of the modified DOP...
متن کاملبررسی کاربرد نانوذرات تیتانیوم دیاکسید در بهبود مقاومت استحکامبخش پلیوینیل بوتیرال دربرابر قارچِ پوسیدگی سفید چوب
The synthetic polymers are widely used as adhesives, consolidants and protective coatings in the conservation of historic relics. Although, compared to the natural polymers and adhesives, these materials present a better resistance against the microorganisms, most synthetic polymers remain appropriate sources of Carbon and energy for the growth of microorganism; in addition, the relics consolid...
متن کاملInfluence of distillation system, oak wood type, and aging time on composition of cider brandy in phenolic and furanic compounds.
A control of phenolic and furanic compounds in cider brandy was carried out during maturation in oak casks, studying three technological factors: distillation (rectification column vs double distillation), oak wood type (French vs American), and aging time (32 months). Gallic acid and benzoic and cinnamic aldehydes significantly increased during maturation of cider brandies, the highest level o...
متن کامل