Microwave Characterization of Bio-composites Materials Based Finite Element and Nicholson–ross–weir Methods
نویسندگان
چکیده
In this work, Bio-composite of oil palm empty fruit bunch fibre (OPEFB)-filler and polycaprolactone (PCL)-polymer has been prepared and characterized. The functional groups and morphology of the prepared samples were characterized by Fourier transform infrared spectroscopy (FT-IR). By using the NicholsonRoss-Weir (NRW) mode, both of real and imaginary relative permittivity values of the samples were obtained simultaneously from the reflection and transmission coefficient measurements of the materials. Whereas, the attenuation with the field distribution at the waveguide filled with a sample were considered by using the Finite Element Method (FEM). The magnitude of the reflection and transmission (R/T) coefficients of the composite with different filler percentages were measured using rectangular waveguide in conjunction with a microwave vector network analyzer (VNA) in X-band range of frequency. The computations of the S-parameters were achieved by using the FEM technique along with NRW mode. Then, the obtained results were compared with the measured R/T coefficients. Relative error results nominated the FEM mode due to its highly accurate results than the other method. (
منابع مشابه
Mechanical Properties Characterization of Biax and Triax Composites Based on Limited Experimental Data
The main goal of this research is to extract the full mechanical properties of stitch biax and triax composite materials which are necessary for finite element analysis, based on limited available experimental data and without performing full static characterization tests. Utilized experimental data are limited to elastic modulus of two 0o and 45o directions. Using presented technique and afore...
متن کاملMeso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method
One of the key issues associated with using of composites in various applications is their tensile behavior. The tensile behavior of a composite material is strongly influenced by the properties of its constituents and their distribution. This paper focuses on gaining some insights into the tensile process of pure and hybrid woven composite reinforced with brittle and ductile yarns. For this pu...
متن کاملQuasi-Dynamic Homogenization of Geometrically Simple Dielectric Composites
The frequency dependence of the effective permittivities of simple dielectric composites is evaluated by different quasidynamic homogenization methods. Three retrieval approaches based on the scattering parameters are proposed for dielectric materials. A compensation method for the conventional Nicolson-Ross-Weir (NRW) retrieval is applied to eliminate the FabryPérot (FP) resonances and their d...
متن کاملComparison of Two Computational Microstructure Models for Predicting Effective Transverse Elastic Properties of Unidirectional Fiber Reinforced Composites
Characterization of properties of composites has attracted a great deal of attention towards exploring their applications in engineering. The purpose of this work is to study the difference of two computational microstructure models which are widely used for determining effective transverse elastic properties of unidirectional fiber reinforced composites. The first model based on the classic me...
متن کاملInvestigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM
Carbon nanotube (CNT) is considered as a new generation of material possessing superior mechanical, thermal and electrical properties. The applications of CNT, especially in composite materials, i.e. carbon nanotube reinforced polymer have received great attention and interest in recent years. To characterize the influence of CNT on the stress intensity factor of nanocomposites, three fracture ...
متن کامل