Enhanced Low-Temperature Performance of Li–CFx Batteries
نویسندگان
چکیده
Enhanced Low-Temperature Performance of Li–CFx Batteries J. F. Whitacre,* W. C. West,* M. C. Smart,* R. Yazami,* G. K. Surya Prakash,* A. Hamwi, and B. V. Ratnakumar* Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California, USA California Institute of Technology, Pasadena, California, USA University of Southern California, Los Angeles, California, USA Université Blaise Pascal de Clermont-Ferrand, 63177 Aubière, France
منابع مشابه
Progress towards high-power Li/CFx batteries: electrode architectures using carbon nanotubes with CFx.
Carbon monofluoride (CFx) has a high energy density, exceeding 2000 W h kg(-1), yet its application in primary lithium batteries is limited by its power capability. Multi-walled carbon nanotubes (CNTs) are appealing additives for high-power batteries, due to their outstanding electronic transport properties, high aspect ratio necessitating low volume fraction for percolation, and high tensile s...
متن کاملElectrochemical properties of iron oxide nanoparticles as an anode for Li-ion batteries
The synthesis of iron oxide nano-particles by direct thermal decomposition was studied. Simultaneous thermal analysis and Fourier transform infrared spectroscopy results confirmed the formation of iron-urea complex, and disclosed iron oxide formation mechanism. Calcination of the iron-urea complex at 200°C and 250°C for 2 hrs. resulted in the formation of maghemite along with hematite as a seco...
متن کاملImproving the performance of Lithium-Sulfur Batteries using Sulfur-(TiO2/SiO2) yolk–shell Nanostructure
Lithium-Sulfur (Li-S) batteries are considered as one of the promising candidates for next-generation Li batteries in near future. Although, these batteries are suffering from certain drawbacks such as rapid capacity fading during the charge and discharge process due to the dissolution of polysulfides. In this paper, Sulfur/metal oxide (TiO2 and SiO2) yolk–shell structures have been successfull...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملAn Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes
Lithium ion batteries are among the most used rechargeable batteries in the world. Carbon nanostructures including carbon nanotubes (CNTs) are considered as important electrode materials for this kind of batteries. Therefore improving the performance of these carbon based electrodes in Lithium ion batteries is an important issue and attracts much attention in the battery community. In this manu...
متن کامل