Numerical Study of Nail Board Experiments to Determine the Characteristics of the Surface in the CC Mold
نویسندگان
چکیده
In order to study the problem of surface fluctuations and slag entrapment, the nail board experiment and simulation computation method was used to optimize the method for measuring liquid level characteristics in mold. The influence of steel nails diameter and the distance between steel nails on the measurement results was studied. The height of the liquid surface and the surface velocity at different time and position were both obtained. The experimental results were compared with the results of numerical simulation. The large eddy simulation (LES) method is used to calculate the steel nails with different diameters and the spacing of the steel nails taking slag layer into consideration. It is showed that when the diameter of the steel nail is 10 mm and the distance between adjacent steel nails is 100 mm, the measurement results is most accurate which is in good agreement with the actual conditions.
منابع مشابه
A 3D Numerical and Empirical Study on the Effects of Injection Pressure and Temperature on the Quality of Produced Mold
Plastic injection is a method in which, with using an extruder in granules, plastic is injected in a hole with high pressure. Because of meeting the two flow fronts in this process welding line will be made. Along the welding line the strength of produced part is low; therefore the position of welding line and its clarity are very important. In this paper, analyzes have been done with Fluent an...
متن کاملOptimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology
Centrifugal casting is one of the advanced casting branches widely used in the metallurgical industry in which the centrifugal force helps strengthen the workpiece material. The present work attempt to study the effect of the horizontal and vertical centrifugal casting parameters included the centrifugal mold rotation speeds and G-factors values on the quality of the product. The work has been ...
متن کاملNumerical Modeling of Mold Filling and Curing in Non-Isothermal RTM Process (RESEARCH NOTE)
Resin Transfer Molding (RTM) is a composite manufacturing process. A preformed fiber is placed in a closed mold and a viscous resin is injected into the mold. In this paper, a model is developed to predict the flow pattern, extent of reaction and temperature change during filling and curing in a thin rectangular mold. A numerical simulation is presented to predict the free surface and its inter...
متن کاملNumerical Prediction of Temperature Distribution in Transient RTM Process
Resin Transfer Molding (RTM) is a composite manufacturing process. A preformed fiber is placed in a closed mold and a viscous resin is injected into the mold. In this paper, a model is developed to predict the flow pattern, extent of reaction and temperature change during filling and curing in a thin rectangular mold. A numerical simulation is presented to predict the free surface and...
متن کاملThe influence of TiO2 and Na2CO3 on the viscosity and crystallization behavior of mold powders
Mold powders are fluxing agents used as raw materials in the steel industry, which play very important role in processing stability and final surface quality of a product. Surface quality depends particularly on the viscosity and the heat transfer of infiltrated mold flux between the mold wall and the solidified steel shell. Heat flux across the interfacial gap depends on thermal properties of ...
متن کامل