Automated Computer Systems for Manufacturability Analyses and Tooling Design Applied to the Rotary Draw Bending Process
نویسنده
چکیده
منابع مشابه
Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube
The Rotary-Draw Bending (RDB) process is a distinguished process employed for the precision cold bending of a hollow tube with small radius bends using Numerical Control (NC) machines. This research presents an analytical model based on the power law hardening model for the RDB processing of rectangular thin tubes. Based on the constraints of the tube in the dies and its thinness, the plane str...
متن کاملExperimental and Numerical Investigation on the Heat Treatment Effects of AA6063 Aluminum Alloy Tubes During Rotary Draw Bending
In this study, the effects of heat treatment of aluminum alloy on the tube bending process were investigated in the rotary draw bending process. As two experimental and numerical simulation methods were used to determine the wall-thinning, ovality, and spring back for extruded, annealed, and aged AA6063 aluminum alloy tubes in different bending angles and bend radii. Numerical simulations were ...
متن کاملComputer aided rapid tooling process selection and manufacturability evaluation for injection mold development
Injection mold development lead time has been reduced presently by over 50% by employing rapid prototyping based tooling methods. Rapid tooling methods however, have certain limitations in terms of mold material, accuracy, surface finish, and mold life. The relevant process knowledge, especially for newer routes, is not very well established, resulting inconsistent or inappropriate rapid toolin...
متن کاملComputer aided rapid tooling process selection and manufacturability evaluation for injection mold
Injection mold development lead time has been reduced presently by over 50% by employing rapid prototyping based tooling methods. Rapid tooling methods however, have certain limitations in terms of mold material, accuracy, surface finish, and mold life. The relevant process knowledge, especially for newer routes, is not very well established, resulting inconsistent or inappropriate rapid toolin...
متن کامل