Diagnosis of Slides in Rotary Compressors Using Acoustic Emission Technique
نویسندگان
چکیده
منابع مشابه
Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique
One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...
متن کاملAssuring Reliability of Compressors Using HFC Refrigerants
In Japan, the refrigerant used in room air-conditioners has been changed from HCFC-22 (R-22) to R-410A, a blend of HFC-32 and HFC-125 (50/50 vt%), in order to protect the ozone layer. Generally, the miscibility between the refrigerant and refrigeration oil must be assured, because the oil needs to return to the compressor from the refrigeration cycle and lubricate the sliding parts. Alternative...
متن کاملDamage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method
In this study, the longitudinal and hoop tensile strengths of an industrial ±55° Glass Reinforced Epoxy (GRE) pipe with eighteen layers as well as the associated failure mechanisms are determined. To obtain the longitudinal and hoop tensile strengths values, three specimens are cut from the studied GRE pipe in each direction. A comparison is done between both the strength values, and the fractu...
متن کاملVibration-Acoustics Study of R410A Rotary Compressors
This paper demonstrates a typical process to investigate the vibro-acoustic behavior of R410A rotary compressors. The compressor shell is usually the main noise radiator in a rotary compressor. However, the accumulator shell can be a significant noise source as well, although its size is relatively small. Sound performance of a rotary compressor is affected not only by the dynamic characteristi...
متن کاملSelection of Friction Materials Used in Compact, High Performance Inverter Controlled Rotary Compressors
T. IIZUKA and K. IKEDA Tochigi Works Hitachi, Ltd. Shimotsuga-gun, Tochigi-ken, Japan, 329-44 Since applications of rotary compressors driven by inverter motors have become more widespread, l~bricating problems with the sliding parts have been appearing. The sliding parts require sufficient antiseizure and wear-resistant properties under the boundary lubricating conditions. The authors have dev...
متن کامل