Adsorption of surface functionalized silica nanoparticles onto mineral surfaces and decane/water interface

نویسندگان

  • Cigdem O. Metin
  • Jimmie R. Baran
  • Quoc P. Nguyen
چکیده

The adsorption of silica nanoparticles onto representative mineral surfaces and at the decane/water interface was studied. The effects of particle size (the mean diameters from 5 to 75 nm), concentration and surface type on the adsorption were studied in detail. Silica nanoparticles with four different surfaces [unmodified, surface modified with anionic (sulfonate), cationic (quaternary ammonium (quat)) or nonionic (polyethylene glycol (PEG)) surfactant] were used. The zeta potential of these silica nanoparticles ranges from -79.8 to 15.3 mV. The shape of silica particles examined by a Hitachi-S5500 scanning transmission electron microscope (STEM) is quite spherical. The adsorption of all the nanoparticles (unmodified or surface modified) on quartz and calcite surfaces was found to be insignificant. We used interfacial tension (IFT) measurements to investigate the adsorption of silica nanoparticles at the decane/water interface. Unmodified nanoparticles or surface modified ones with sulfonate or quat do not significantly affect the IFT of the decane/water interface. It also does not appear that the particle size or concentration influences the IFT. However, the presence of PEG as a surface modifying material significantly reduces the IFT. The PEG surface modifier alone in an aqueous solution, without the nanoparticles, yields the same IFT reduction for an equivalent PEG concentration as that used for modifying the surface of nanoparticles. Contact angle measurements of a decane droplet on quartz or calcite plate immersed in water (or aqueous nanoparticle dispersion) showed a slight change in the contact angle in the presence of the studied nanoparticles. The results of contact angle measurements are in good agreement with experiments of adsorption of nanoparticles on mineral surfaces or decane/water interface. This study brings new insights into the understanding and modeling of the adsorption of surface-modified silica nanoparticles onto mineral surfaces and water/decane interface.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Amphiphilic silica nanoparticles at the decane-water interface: insights from atomistic simulations.

The properties of 3 nm-diameter silica nanoparticles with different surface chemistry were systematically investigated at the decane-water interface using molecular dynamics simulations. Our results show that the decane-water interfacial tension is not much influenced by the presence of the nanoparticles. The three-phase contact angle increases with nanoparticle surface hydrophobicity. Contact ...

متن کامل

Formation and Adsorption of Clusters of Gold Nanoparticles onto Functionalized Silica Nanoparticle Surfaces

This paper reports a systematic investigation of the growth and attachment of small gold nanoparticles to the functionalized surfaces of larger silica nanoparticles. Dilution of the gold nanoparticles in mixtures of water and ethanol led to the self-assembly of gold nanoparticles in aggregates of regular size and shape attached to the surfaces of the silica nanoparticles. Functionalization of t...

متن کامل

Investigation of performance of bimodal/functionalized mesoprorous silica nanoparticles on the adsorption of methylene blue from aqueous solution

In this study, bimodal mesoporous silica, i.e. UVM-7, was synthesized and functionalized withsulfonic acid and characterized using XRD, nitrogen physisorption, SEM, TEM and acid/basetitration. The results displayed that bimodal mesopore structure was firmly formed and acidicfunctional groups were grafted on the surface of the UVM-7. The concentration of the acidicfunctional groups was determine...

متن کامل

Adsorption of ethylene glycol vapor on (alpha-AI2O3 (0001) and amorphous SiO2 surfaces: observation of molecular orientation and surface hydroxyl groups as sorption sites.

Vapor adsorption is an important process influencing the migration and the fates of many organic pollutants in the environment. In this study, adsorption of ethylene glycol (EG) vapor onto single crystal alpha-Al2O3 (0001) and fused SiO2 (amorphous) surfaces was studied with sum frequency generation spectroscopy, a well-suited surface specific technique for probing interfacial phenomena atthe m...

متن کامل

Adsorption and Neutralization Chemistry of Dimethyl Methyl Phosphonate (DMMP) as an Organo-Phosphorous Pollutant (OPP) on the Surface of Nano-Structured Co3O4 and MnCo2O4 Catalysts

In this work, the practicality of catalytic surfaces of nano-structured Co3O4 and MnCo2O4 for the adsorption and neutralization reactions of dimethyl methyl phosphonate (DMMP) as an toxic agricultural organo-phosphorous pesticide has been investigated. The Co3O4 and MnCo2O4 NPs have been successfully prepared by precipitation method using cobalt nitrate and manganese nitrate as the precursors a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 14  شماره 

صفحات  -

تاریخ انتشار 2012