Effect of Sparse-build Internal Structure on Performance of Fused Deposition Modeling Tools under Pressure
نویسندگان
چکیده
Two different approaches to design a sparse-build tool for fabrication by the fused deposition modeling (FDM) process are compared. One approach uses a 2D lattice structure and the other approach is inspired by topology optimization. Ultem 9085 is used as the material, and the amount of material used to build the tool is kept constant to ensure a fair comparison. A solid tool is also included in the comparison. The performance of the tool under uniform pressure is simulated using finite element analysis (FEA) and the accuracy of the FEA results is verified by comparing them with experimentally measured data for a similar tool. The build material, support material, build time, maximum displacement, and maximum von Mises stress are compared for the three build approaches, with an emphasis on the pros and cons of each sparsebuild tool with regards to performance under uniform pressure and fabrication by FDM.
منابع مشابه
A Lumped Parameter Method to Calculate the Effect of Internal Carotid Artery Occlusion on Anterior Cerebral Artery Pressure Waveform
Background and Objective: Numerical modeling of biological structures would be very helpful tool to analyze hundreds of human body phenomena and also diseases diagnosis. One physiologic phenomenon is blood circulatory system and heart hemodynamic performance that can be simulated by utilizing lumped method. In this study, we can predict hemodynamic behavior of one artery of circulatory system (...
متن کاملThe Effectiveness of Assertiveness Training on Bullying, Competitive State Anxiety and Performance Under Pressure in Futsal Players
The aim of this research was determined the effect of assertiveness training on bullying, competitive state anxiety and performance under pressure in futsal players. 32 futsal players teenage guys who scored from low to moderate were scored in assertiveness questionnaire and were purposefully placed into two experimental and control groups. The experimental group was given eight session trainin...
متن کاملModeling Of Heat Transfer And Solidification Of Droplet/Substrate In Microcasting SDM Process
Microcasting Shape-Deposition-Manufacturing is an approach to Solid-Freeform-Fabrication (SFF) process which is a novel method for rapid automated manufacturing of near-net-shape multi-material parts with complex geometries. By this method, objects are made by sequentially depositing molten metal droplets on a substrate and shaping by a CNC tool, layer by layer. Important issues are concerned w...
متن کاملNon-isotropic Material Distribution Topology Optimization for Fused Deposition Modeling Products
Mechanical properties of products produced with the Fused Deposition Modeling (FDM) process are known to be dependent on bead direction, especially when short fiber reinforcement is added to the polymer filament feedstock. As a result, the structural performance of fiber-filled FDM parts is expected to be improved by simultaneously computing preferred deposition directions while optimizing the ...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016