Additional sampling directions improve detection range of wireless radiofrequency probes
نویسندگان
چکیده
PURPOSE While MRI is enhancing our knowledge about the structure and function of the human brain, subject motion remains a problem in many clinical applications. Recently, the use of wireless radiofrequency markers with three one-dimensional (1D) navigators for prospective correction was demonstrated. This method is restricted in the range of motion that can be corrected, however, because of limited information in the 1D readouts. METHODS Here, the limitation of techniques for disambiguating marker locations was investigated. It was shown that including more sampling directions extends the tracking range for head rotations. The efficiency of trading readout resolution for speed was explored. RESULTS Tracking of head rotations was demonstrated from -19.2 to 34.4°, -2.7 to 10.0°, and -60.9 to 70.9° in the x-, y-, and z-directions, respectively. In the presence of excessive head motion, the deviation of marker estimates from SPM8 was reduced by 17.1% over existing three-projection methods. This was achieved by using an additional seven directions, extending the time needed for readouts by a factor of 3.3. Much of this increase may be circumvented by reducing resolution, without compromising accuracy. CONCLUSION Including additional sampling directions extends the range in which markers can be used, for patients who move a lot. Magn Reson Med 76:913-918, 2016. © 2015 The Authors. Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.
منابع مشابه
Fast contactless vibrating structure characterization using real time field programmable gate array-based digital signal processing: demonstrations with a passive wireless acoustic delay line probe and vision.
Vibrating mechanical structure characterization is demonstrated using contactless techniques best suited for mobile and rotating equipments. Fast measurement rates are achieved using Field Programmable Gate Array (FPGA) devices as real-time digital signal processors. Two kinds of algorithms are implemented on FPGA and experimentally validated in the case of the vibrating tuning fork. A first ap...
متن کاملA Lightweight Intrusion Detection System Based on Specifications to Improve Security in Wireless Sensor Networks
Due to the prevalence of Wireless Sensor Networks (WSNs) in the many mission-critical applications such as military areas, security has been considered as one of the essential parameters in Quality of Service (QoS), and Intrusion Detection System (IDS) is considered as a fundamental requirement for security in these networks. This paper presents a lightweight Intrusion Detection System to prote...
متن کاملImprove range-free localization accuracy in wireless sensor network using DV-hop and zoning
In recent years, wireless sensor networks have drawn great attention. This type of network is composed of a large number of sensor nodes which are able to sense, process and communicate. Besides, they are used in various fields such as emergency relief in disasters, monitoring the environment, military affairs and etc. Sensor nodes collect environmental data by using their sensors and send them...
متن کاملبررسی عملکرد پروبهای UHF در آشکارسازی تخلیه جزئی در ترانسفورماتورهای فشار قوی
Recently, UHF partial discharge (PD) detection on power transformers attracts lots of attentions. For the transformers already installed in power network, the UHF signals can be captured only by UHF probes installed through oil drain valve. Although UHF probes are commercially produced, there are a lot of missing information on characteristics and features of these probes for PD detection. In t...
متن کاملUnauthenticated event detection in wireless sensor networks using sensors co-coverage
Wireless Sensor Networks (WSNs) offer inherent packet redundancy since each point within the network area is covered by more than one sensor node. This phenomenon, which is known as sensors co-coverage, is used in this paper to detect unauthenticated events. Unauthenticated event broadcasting in a WSN imposes network congestion, worsens the packet loss rate, and increases the network energy con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 76 شماره
صفحات -
تاریخ انتشار 2016