DataShopping for Performance Predictions

A comparative analysis of two neural network predictions for performance and emissions in a biodiesel fuelled diesel Engine

Energy Conservation Potential of the Heat Pipe Heat Exchangers: Experimental Study and Predictions

The energy conservation potential of the heat pipe based heat exchangers (HPHXs) was studied in this research. To this end, a typical climate chamber as the representative of an air conditioning system was established. The performance characteristic of a typical eight-row HPHX was obtained based on the one week operation (168 h) to determine the performance characteristic curves. The coil face ...

The Performance of Karafillis-Boyce Yield Function on Determination of Forming Limit Diagrams

Forming Limit Diagrams are useful tools for evaluation of formability in the sheet metals. In this paper the effects of yield criteria on predictions of the right and left-hand sides of forming limit diagrams (FLDs) are investigated. In prediction of FLD, Hosford 1979, “Karafillis-Boyce” (K-B) and BBC2000 anisotropy yield functions have been applied. Whereas the prediction of FLD is based on th...

The Development and Validation of New Equations for Prediction of the Performance of Tangential Cyclones

New equations have been developed to predict the effect of geometrical dimensions of tangential cyclones on their operational performances. To check the validity of the derived equations, an experimental apparatus was set up and some experimental work was performed. It was observed that the experimental results confirm properly the theoretical predictions.

The Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations

The single-phase flow and thermal performance of a double pipe heat exchanger are examined by experimental methods. The working fluid is water at atmospheric pressure. Temperature measurements at the inlet and outlet of the two streams and also at an intermediate point half way between the inlet and outlet is made, using copper-constantan thermocouple wires. Mass flow rates for each stream are ...