Vibration Damping of Thermal Barrier Coatings Containing Ductile Metallic Layers
نویسندگان
چکیده
This paper explores the vibration damping properties of thermal barrier coatings (TBCs) containing thin plastically deformable metallic layers embedded in an elastic ceramic matrix. We develop an elastic–plastic dynamical model to study how work hardening, yield strain, and elastic modulus of the metal affect the macroscopic damping behavior of the coating. Finite element (FE) simulations validate the model and are used to estimate the damping capacity under axial and flexural vibration conditions. The model also provides an explanation for the widely observed nonlinear variation of the loss factor with strain in plasma-spayed TBCs. Furthermore, it facilitates the identification of multilayer configurations that maximize energy dissipation. [DOI: 10.1115/1.4028031]
منابع مشابه
Failure Mechanisms Investigation in Thermal Barrier Coatings under Isothermal and Non-sothermal Fatigue Loadings using Design of Experiments
In this article, failure and fracture mechanisms in an aluminum alloy (which has been used in diesel internal combustion engines), with and without ceramic thermal barrier coatings, have been investigated under isothermal and non-isothermal fatigue loadings. In this research, the base material is an aluminum-silicon-magnesium alloy and the thermal barrier coating includes a metallic bond coat l...
متن کاملDelamination resistance of thermal barrier coatings containing embedded ductile layers
Micromechanical models are developed to explore the effect of embedded metal layers upon thermal cycling delamination failure of thermal barrier coatings (TBCs) driven by thickening of a thermally grown oxide (TGO). The effects of reductions in the steady-state (i.e. maximum) energy release rate (ERR) controlling debonding from large interface flaws and decreases in the thickening kinetics of T...
متن کاملFinite element study of multi-modal vibration damping for thermal barrier coating applications
A physically-based computational model is developed to predict the damping behavior of oxide thermal barrier coating systems. The constitutive damping model is derived from the theory of point defect relaxation in crystalline solids and implemented within a finite element framework. While oxide coatings have been primarily employed as thermal barriers for gas turbine blades, there is a growing ...
متن کاملSimulation of the effect of sub- micron interface roughness on the stress distribution in functionally graded thermal barrier coatings (FG- TBC)
In this research, a numerical modeling was utilized to calculate the stresses caused during thermal cycling in a functionally graded thermal barrier coating (FG - TBC). The temperature – dependent material response of this protective material was taken into account and the effects of thermal cycle and interface morphology of the ceramic / metallic layer in functionally graded coating system wa...
متن کاملHot Corrosion Behavior of Functional Graded Material Thermal Barrier Coating (RESEARCH NOTE)
In this paper a functional graded material (FGM) thermal barrier coating (TBC) is prepared using Atmospheric Plasma Spraying (APS) method. The FGM layers were deposited by varying the feeding ratio of CYSZ/NiCrAlY and conventional CYSZ on a NiCrALY-coated Inconel 738 substrates. Hot corrosion behavior, bonding strength and the related failure mechanisms of a conventional TBC and a FGM TBC are i...
متن کامل