Adsorption of fluorinated ethers and alcohols on fresh and oxidized carbon overcoats for magnetic data storage.
نویسندگان
چکیده
Temperature programmed desorption has been used to study the desorption kinetics and desorption energies of perfluorodiethylether, (CF3CF2)2O, and 2,2,2-trifluoroethanol, CF3CH2OH, adsorbed on fresh and oxidized hydrogenated amorphous carbon (a-CHx) films. (CF3CF2)2O and CF3CH2OH serve as models for the ether backbone and hydroxyl end-groups of Fomblin Zdol, the lubricant most commonly used to lubricate the surfaces of amorphous carbon overcoats on magnetic data storage hard disks. Our measurements clearly reveal, for the first time, the effects of surface oxidation on the adsorption of fluorocarbon lubricants such as Fomblin Zdol on a-CHx films. Oxidation of the a-CHx surface increases the desorption energy of CF3CH2OH but has no observable impact on the desorption energy of (CF3CF2)2O. These results support the suggestion that the alcohols interact with the surface via hydrogen bonding. From a practical perspective, these results imply that the oxidation of the fresh a-CHx film may serve as a means to control or tailor the a-CHx surface to optimize the properties of the lubricant-overcoat interface in hard disks.
منابع مشابه
Interaction of alcohols and ethers with a-CF(x) films.
The surfaces of the magnetic data storage hard disks used in computers are coated with a thin film of amorphous carbon and a layer of perfluoropolyalkyl ether (PFPE) lubricant. Both protect the surface of the magnetic layer from contact with the read-write head flying over the disk surface. Although the most commonly used carbon films are amorphous hydrogenated carbon, a-CH(x), it has been sugg...
متن کاملInteraction of Alcohols with a-CHx Films
Temperature programed desorption has been used to study the desorption kinetics and desorption energies of a set of alcohols and fluorinated alcohols adsorbed on an a-CHx film. The alcohols serve as models for the hydroxyl end groups of Fomblin Zdol, the lubricant most commonly used with the amorphous carbon overcoats sputtered onto the surfaces of magnetic data storage disks. Temperature progr...
متن کاملEffect of Humidity on Lubricated Carbon Overcoats
An apparatus has been designed and built to measure the adsorption of contaminants on the surfaces of lubricated carbon overcoats such as those used on magnetic data storage media. The device is based on a quartz crystal microbalance housed in a high vacuum chamber and can be used to make rapid measurements of both the amounts and the rates of contaminant adsorption from the gas phase during ex...
متن کاملWater adsorption on fullerene-like carbon nitride overcoats
Humidity influences the tribological performance of the head-disk interface in magnetic data storage devices. In this work we compare the uptake of water of amorphous carbon nitride (a-CNx) films, widely used as protective overcoats in computer disk drive systems, with fullerene-like carbon nitride (FL-CNx) and amorphous carbon (a-C) films. Films with thickness in the range 10–300 nm were depos...
متن کاملAdsorption of Nile Blue A from Wastewater Using Magnetic Multi-Walled Carbon Nanotubes: Kinetics and Equilibrium Studies
Background: Synthetic dyes are serious pollutants and wide ranges of methods have been employed for their removal from aquatic systems. We studied the adsorption of "Nile blue A" (NBA), an anionic dye, from aqueous solution by oxidized multi-walled carbon nanotubes (MWCNTs). Methods: Scanning electron microscope and Fourier transform infrared spectroscopy were used to characterize ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 23 4 شماره
صفحات -
تاریخ انتشار 2007