Effects of silane coupling agents and solutions of different polarity on PMMA bonding to alumina.

نویسندگان

  • Pisaisit Chaijareenont
  • Hidekazu Takahashi
  • Norihiro Nishiyama
  • Mansuang Arksornnukit
چکیده

The objective of this study was to clarify the effects of silane coupling agents and solutions of different polarity on polymethyl methacrylate (PMMA) bonding to alumina. Three silane coupling agents (3-methacryloxypropyltrimethoxysilane (MPS),3-aminopropyltriethoxysilane (APS) and N-2 (aminoethyl) 3-aminopropyltriethoxysilane) and 3 different polar solutions, 70% ethanol, isopropanol and toluene, were selected for silanization. Shear bond strengths were statistically compared with Tukey HSD(α=0.05). The alumina surfaces after silanization and shear bond test were examined with an energy dispersive spectrometer (EDS).The bond strengths of PMMA on the alumina with MPS (15.0 MPa), APS (13.8 MPa) in ethanol were greater than the others in nonthermocyclings. The bond strength decreased after thermocyclings. The ethanol groups were greater than the others. EDS revealed Si remaining on the alumina surface after the shear bond test. The results indicated that the silanization using MPS and APS with ethanol solution was effective.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of different amounts of 3-methacryloxypropyltrimethoxysilane

Recently, there have been many materials used for denture base such as polymethyl methacrylate (PMMA) resin, modifi ed PMMA resin and nylon1,2). The material most often used to fabricate denture base and denture teeth was PMMA resin. PMMA is the most commonly used material due to its good mechanical and physical properties, compatibility with oral tissue, aesthetics, ease of repair and low cost...

متن کامل

Silane and bonding of Resins to Ceramic

Silane and bonding of Resins to Ceramic Dr. K. Seyyedan* - Dr. M. Kalalipoor** - Dr. M. Javan***Assistant Professor of Fixed Prosthodontics Dept., Faculty of Dentistry, Shaheed Beheshti University of Medical Sciences. **Resident of Fixed Prosthodontics Dept., Faculty of Dentistry, Shaheed Beheshti University of Medical Sciences. Background and Aim: When bonding between two different dental mate...

متن کامل

A Numerical Method for the Determination of an Effective Modules for Coated Glass Fibers Used in Phenolic Composites

It is well known that the mechanical properties of fiberglass reinforced "phenolic moulding compounds" are significantly enhanced if the glass particles are coated with silane coupling agents before compounding. It has been shown that improvements obtained by using scanning electron microscopy techniques are due to better bonding of phenolic resin to the surface of treated glass fibers. These o...

متن کامل

Bond Strength and Water Resistance of a Resin Composite Bonded to Glass Plates Treated with Commercial Ceramic Primers

Background: Silane coupling agents are used as a bonding agent between ceramics and resins in dentistry. The effectiveness of these agents is often enhanced by the addition of acid or by heat treatment. Objective: This study aimed to evaluate, the clinical characteristics, TBS (tensile bond strength) and water resistance of eight commercial ceramic primers (seven silane coupling agents and one ...

متن کامل

Surface modification of ZnO nano-particles with Trimetoxyvinyl Silane and Oleic Acid and studying their dispersion in organic media

Zinc oxide nano-particles with the average diameter of about 25 nm were modified with different mole ratios of trimetoxyvinyl silane (TMVS) and oleic acid, as coupling agents, in order to modify their surface properties and render them more hydrophobic. Then, dispersibility of the surface modified nano-particles was examined in some monomers with different levels of hydrophobicity, including me...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Dental materials journal

دوره 31 4  شماره 

صفحات  -

تاریخ انتشار 2012