Performance Evaluation of Computer Simulated Extracted Features of Induction Motor with Intermediate State of Degradation Present in Any Two-Phases
نویسندگان
چکیده
The state of degradation of stator groundwall insulation in induction motor results in the state of unbalance in three-phase stator current at fundamental frequency. In this investigation, the computer simulation model to determine this state of unbalance is developed. On the basis of park’s transformation model the unbalanced stator current data in three-phase machine variable (‘abc’) form is first transformed into equivalent two-phase (‘dq’) model form. The park’s current vector components are then presented in a graphical dqdata pattern form and certain mathematical parameters are deduced. The computer simulation model is designed to extract simulated electrical variables and mathematical parameters of induction motor under test. The practical assumption of stator winding of induction motor being star (Υ) connected with isolated neutral is considered. The extracted features of induction motor for particular case of variation in the state of degradation of stator groundwall insulation occurring in respective phases is presented. The performance evaluation of extracted features for the variation in the state of degradation of insulation in one particular phase from healthy to worst-case state along with an arbitrary intermediate state of degradation of insulation present in other two-phases is presented. On the basis of performance evaluation, it is possible to determine the appropriate selection of specific input parameter for optimal design of suitable artificial neural network classifier to distinguish the probable states of degradation of insulation.
منابع مشابه
Performance Evaluation of Computer Simulated Extracted Features of Induction Motor with Intermediate State of Degradation Present in Any-One Phase
The state of degradation of stator groundwall insulation in induction motor results in the state of unbalance in threephase stator current at fundamental frequency. In this investigation, the computer simulation model to determine this state of unbalance is developed. On the basis of park‟s transformation model the unbalanced stator current data in three-phase machine variable („abc‟) form is t...
متن کاملA Comparison Between Electrical Circuit and Finite Element Modeling Methods for Performance Analysis of a Three-Phase Induction Motor under Voltage Unbalance
Induction motor is the most popular load in the industry, it is very important to study about the effects of voltage quality on induction motor performance. One of the most important voltage quality problems in power system is voltage unbalance. This paper evaluates and compares two methods including finite element method (FEM) and equivalent electrical circuit simulation for investigation ...
متن کاملImprovement of Electromagnetic Forces in a Single-Phase Induction Motor by Providing a New Winding Distribution
Single-phase induction motors have a wide range of domestic and industrial applications. These motors have a squirrel cage rotor and their stator usually has two windings: main and auxiliary. The use of auxiliary winding in the structure of single-phase induction motors creates two unbalance and asymmetric phases. This causes to increase the spatial harmonics of the field in the air gap, and al...
متن کاملIncreasing the Efficiency of the Power Electronic Converter for a Proposed Dual Stator Winding Squirrel-Cage Induction Motor Drive Using a Five-Leg Inverter at Low Speeds
A dual stator winding squirrel-cage induction motor (DSWIM) is a brushless single-frame induction motor that contains a stator with two isolated three-phase windings wound with dissimilar numbers of poles. Each stator winding is fed by an independent three-phase inverter. The appropriate efficiency of this motor is obtained when the ratio of two frequencies feeding the machine is equal to the r...
متن کاملComputer Aided Design for Single-Phase Induction Motors Based on a New Gemoetrical Approach
Design of electrical motors normally involves two main stages: i) Preparation of the main dimensions and parameters. ii) Prediction of the performance. At the first stage the main dimensions of the motor, core stack Lfe and stator outer diameter Do, must be chosen. A set of performance conditions such as breakdown torque, desired output and other important parameters must satisfy the internatio...
متن کامل