Enhancing flow boiling heat transfer in microchannels for thermal management with monolithically-integrated silicon nanowires.

نویسندگان

  • D Li
  • G S Wu
  • W Wang
  • Y D Wang
  • Dong Liu
  • D C Zhang
  • Y F Chen
  • G P Peterson
  • Ronggui Yang
چکیده

Thermal management has become a critical issue for high heat flux electronics and energy systems. Integrated two-phase microchannel liquid-cooling technology has been envisioned as a promising solution, but with great challenges in flow instability. In this work, silicon nanowires were synthesized in situ in parallel silicon microchannel arrays for the first time to suppress the flow instability and to augment flow boiling heat transfer. Significant enhancement in flow boiling heat transfer performance was demonstrated for the nanowire-coated microchannel heat sink, such as an early onset of nucleate boiling, a delayed onset of flow oscillation, suppressed oscillating amplitudes of temperature and pressure drop, and an increased heat transfer coefficient.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microchannel size effects on local flow boiling heat transfer to a dielectric fluid

Heat transfer with liquid–vapor phase change in microchannels can support very high heat fluxes for use in applications such as the thermal management of high-performance electronics. However, the effects of channel cross-sectional dimensions on the two-phase heat transfer coefficient and pressure drop have not been investigated extensively. In the present work, experiments are conducted to inv...

متن کامل

Pool Boiling Heat Transfer Enhancement Through Nanostructures on Silicon Microchannels

Uniform silicon nanowires (SiNW) were successfully fabricated on the top, bottom, and sidewall surfaces of silicon microchannels by using a two-step electroless etching process. Different microchannel patterns with the channel width from 100 to 300 lm were first fabricated in a 10 mm 10 mm silicon chip and then covered by SiNW with an average height of 10–20 lm. The effects of the microchannel ...

متن کامل

Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models

Subcooled flow boiling in multi-microchannels can be used as an efficient thermal management approach in compact electrical devices. Highly subcooled flow boiling of HFE 7100 is studied in two microchannel heat sinks to choose a proper numerical model for simulating boiling flows in microchannels. Results of five different numerical models, including Volume of Fluid (VOF), Eulerian boiling, Eul...

متن کامل

Experimental Investigation of Non-uniform Heating on Flow Boiling Instabilities in a Microchannels Based Heat Sink

Two-phase flow boiling in microchannels is one of the most promising cooling technologies able to cope with high heat fluxes generated by the next generation of central processor units (CPU). If flow boiling is to be used as a thermal management method for high heat flux electronics it is necessary to understand the behaviour of a non-uniform heat distribution, which is typically the case obser...

متن کامل

Fabrication of nanowires on orthogonal surfaces of microchannels and their effect on pool boiling

A novel microfabrication technique was developed to create silicon nanowires (SiNWs) on orthogonal surfaces of microchannels machined on top of a silicon wafer. Using a two-step metal-assisted etching process, the SiNW for the first time could be selectively fabricated on two different crystalline directions—the channel top and bottom surfaces oriented in the (1 0 0) direction while the sidewal...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nano letters

دوره 12 7  شماره 

صفحات  -

تاریخ انتشار 2012