Optimization of pulsed jets in crossflow
نویسندگان
چکیده
We use direct numerical simulation to study the mixing behaviour of pulsed jets in crossflow. The pulse is a square wave and the simulations consider several jet velocity ratios and pulse conditions. Our objective is to study the effects of pulsing and to explain the wide range of optimal pulsing conditions found in experimental studies of the problem. The central theme is that pulsing generates vortex rings; the effect of pulsing on transverse jets can therefore be explained by the behaviour of vortex rings in crossflow. Sau & Mahesh (J. Fluid Mech., vol. 604, 2008, pp. 389–409) show that vortex rings in crossflow exhibit three distinct flow regimes depending on stroke and ring velocity ratios. The simulations of pulsed transverse jets in this paper show that at high velocity ratios, optimal pulse conditions correspond to the transition of the vortex rings produced by pulsing between the different regimes. At low velocity ratios, optimal pulsing conditions are related to the natural time scale on which hairpin vortices form. An optimal curve in the space of stroke and velocity ratios is presented. Data from various experiments are interpreted in terms of the properties of the equivalent vortex rings and shown to collapse on the optimal curve. The proposed regime map allows the effects of experimental parameters such as pulse frequency, duty cycle, modulation and pulse energy all to be predicted by determining their effect on the equivalent stroke and velocity ratios.
منابع مشابه
Designing and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow
Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...
متن کاملDesigning and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow
Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...
متن کاملBreakup of Round Nonturbulent Liquid Jets in Gaseous Crossflow
An experimental investigation of the primary breakup of round nonturbulent liquid jets in gaseous crossflow is described. Pulsed shadowgraph and holograph observations were made to determine the following breakup properties: primary breakup regimes, conditions required for the onset of ligament and drop formation, ligament and drop sizes along the liquid surface, drop velocities after breakup, ...
متن کاملNumerical Analysis of Opposed Rows of Coolant Jets Injected into a Heated Crossflow
The mixing characteristics of coolant air jets with the hot gas exiting the gas turbine combustor’s primary zone is of major importance to the combustor exit temperature profile. In the present work, a three dimensional numerical simulation on the basis of the finite volume method was developed. The aim was to investigate the penetration and mixing characteristics of directly opposed rows of co...
متن کامل