Fully 3D Printed 2.4 GHz Bluetooth/Wi-Fi Antenna

نویسنده

  • Paul Deffenbaugh
چکیده

3D printing and printed electronics are combined to demonstrate the feasibility of printing electrically functional RF devices. A combined process is used to demonstrate the feasibility of fabricating a 2.4 GHz antenna in a fully-3D printed object. Both dielectric, which also serves as the structure, and conductors are printed. Full-wave models are generated using Ansoft HFSS. Real-world tests using a Class 1 “100 m” Bluetooth module are conducted and compared against the performance of an industry-standard quarter wavelength monopole antenna.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Implement Printed Rectangular Monopole Broadband Antenna for Wireless Networks

This paper tells how to construct rectangular monopole antenna which will be printed on printed circuit board (PCB). The antenna behaves as planar monopole antenna as it has rectangular patch and ground plane which lies in same plane of PCB. Also this antenna is a broadband antenna because its ratio bandwidth lies under broadband category. In comparison with monopole antenna broadband planer mo...

متن کامل

To Enhance the Bandwidth of Small Printed Inverted T-Shaped Patch Antenna for Wireless And WBAN Applications

In this paper, the radiation performance of a monopole inverted T shape patch antenna designed on glass epoxy FR4 substrate. The proposed design is capable of providing enhanced bandwidth to cover Wi MAX, Wi Fi , WBAN and Bluetooth operations at Absolute Bandwidth (GHz) Below -10 dB is 2. 4GHz to 3. 8 GHz = 1. 4 GHz Second 5. 2 GHz to 6 GHz = 0. 8 GHz and Third 7 GHz to 8. 6 GHz =1. 6 GHz allot...

متن کامل

Techniques to Improve Bandwidth of Rectangular Planar Monopole Antenna

This paper gives information about construction of planar rectangular monopole antenna on Printed Circuit Board (PCB). Behaviour of such planar antenna is same as the rectangular patch antenna with finite ground plane which lies in same plane of given PCB. The designed antenna is a broadband antenna as its ratio bandwidth falls under broadband category. In comparison with monopole antenna broad...

متن کامل

A Dual band Human Shaped Microstrip Patch Antenna for 2.4 GHz and 5.4 GHz Applications

The article presents a structure of human shape microstrip patch antenna operating at dual frequencies. In this paper a rectangular patch of human shape cutting is proposed. The human shape antenna is designed for wireless applications, which works at 2.4 GHz and 5.4 GHz frequencies. This proposed antenna can be widely used for Wi-Fi (IEEE 802.11 standard), BLUETOOTH, WLAN, WiMAX (IEEE 802.16 a...

متن کامل

Compact Printed Diversity Antenna for LTE700/GSM1700/1800/UMTS/Wi-Fi/Bluetooth/LTE2300/2500 Applications for Slim Mobile Handsets

A planar, printed multiple-input multiple-output (MIMO) antenna for slim mobile handset is presented. The dual-antenna system, comprises two symmetric antenna elements, is printed on a printed circuit board (PCB) of mobile phone. Each antenna element consists of coupled-fed loop antenna. The loop antenna is formed by a quarter wavelength (at 762MHz) meandered loop strip with end terminal short-...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014