Automatic Projector Display Surface Estimation Using Every-Day Imagery
نویسندگان
چکیده
Projector-based display systems have been used in computer graphics for about as long as the field has existed. While projector-based systems have many advantages, a significant disadvantage is the need to obtain an accurate analytical model of the mechanical setup, including the external parameters of the projectors, and a description of the display surface. We introduce a new method for the latter. Instead of employing some form of imperceptible structured light that requires non-trivial infrastructure, we continually observe images of whatever graphical content is being projected, to refine an ongoing estimate for the display surface geometry. In effect we enjoy the benefits of the high signal-to-noise ratio of “structured” light, but do not get to choose the structure. The approach is robust and accurate, and can be realized with commercial off-the-shelf components. And although we do not demonstrate this, it can be extended to include continual estimation of other system parameters that vary over time. The method can be used with a variety of projector-based displays, for scientific visualization, trade shows, entertainment, or the Office of the Future. CR
منابع مشابه
Automatic and Continuous Projector Display Surface Estimation Using Everyday Imagery
Projector-based display systems have been used in computer graphics for about as long as the field has existed. While projector-based systems have many advantages, a significant disadvantage is the need to obtain and then adhere to an accurate analytical model of the mechanical setup, including the external parameters of the projectors, and an estimate of the display surface geometry. We introd...
متن کاملAutomatic Alignment Of High-Resolution Multi-Projector Displays Using An Un-Calibrated Camera
A scalable, high-resolution display may be constructed by tiling many projected images over a single display surface. One fundamental challenge for such a display is to avoid visible seams due to misalignment among the projectors. Traditional methods for avoiding seams involve sophisticated mechanical devices and expensive CRT projectors, coupled with extensive human effort for fine-tuning the ...
متن کاملSpatial Control of Interactive Surfaces in an Augmented Environment
New display technologies will enable designers to use every surface as a support for interaction with information technology. In this article, we describe techniques and tools for enabling efficient man-machine interaction in computer augmented multi-surface environments. We focus on explicit interaction, in which the user decides when and where to interact with the system. We present three int...
متن کاملA Cooperative Approach to Continuous Calibration in Multi-projector Displays
TYLER M. JOHNSON: A Cooperative Approach to Continuous Calibration in Multi-Projector Displays (Under the direction of Henry Fuchs) Projection-based displays are often used to create large, immersive environments for virtual reality (VR), simulation, and training. These displays have become increasingly widespread due to the decreasing cost of projectors and advances in calibration and renderin...
متن کاملAuto-Calibrating Projectors for Tiled Displays On Piecewise Smooth Vertically Extruded Surfaces
In this paper we present a novel technique to calibrate multiple casually aligned projectors on fiducial-free piecewise smooth vertically extruded surfaces using a single camera. Such surfaces include cylindrical displays and CAVEs, common in immersive virtual reality systems. We impose two priors to the display surface. We assume the surface is a piecewise smooth vertically extruded surface fo...
متن کامل