Color stability of dry earth pigmented maxillofacial silicone A-2186 subjected to microwave energy exposure.

نویسندگان

  • Sudarat Kiat-amnuay
  • Dennis A Johnston
  • John M Powers
  • Rhonda F Jacob
چکیده

PURPOSE The purpose of this study was to measure spectrophotometrically the color stability of pigmented A-2186 silicone maxillofacial elastomer with 10% by volume of titanium white dry earth opacifier before and after exposure to microwave energy over a simulated 1.5-year period of microwave sterilization. MATERIALS AND METHODS A-2186 silicone elastomer opacified with titanium white dry earth pigment, pigmented with 5 cosmetic dry earth pigment colors [no pigment (control) group (Pc), red (Pr), yellow ochre (Py), burnt sienna (Po), and a mixture of Pr + Py + Po color group (P3)], was used in this study. Each of the 5 experimental groups consisted of 5 specimens. All specimens were placed in a 250 ml glass beaker filled with 150 ml of water (replenished for each microwave exposure). An exposure of 6 minutes was used 18 times (simulating 1.5 years of microwave sterilization with one 6 minute exposure monthly). Reflectance values were measured by spectrophotometer. Three- and two-way analyses of variance with repeated measures were performed for the color difference (DeltaE*) with the factors of group/color/months, and group/months, respectively. Means were compared by Tukey Honest Significant Difference (HSD) multiple range test calculated at the 0.05 level of significance using SPSS. RESULTS The trained human eye can detect color changes (DeltaE*) greater than 1.0. Most DeltaE* values of the red pigment group at all intervals and the mixed pigment group at 15- and 18- month intervals increased significantly greater than 1.0 (p < 0.001) compared with the control group. Yellow and burnt sienna groups remained the most color stable over time with DeltaE* values below 0.35. CONCLUSIONS Lack of color stability of red dry earth pigmented A-2186 silicone maxillofacial elastomers was clinically significant after 12-month exposure to microwave energy as compared with yellow, burnt sienna, and opacified A-2186 dry earth pigments.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Color stability and colorant effect on maxillofacial elastomers. Part I: colorant effect on physical properties.

STATEMENT OF PROBLEM The average clinical life span of a maxillofacial prosthesis is approximately 6 months, at which point it needs to be refabricated, mainly because of degradation of the color and physical properties of the prosthesis. PURPOSE This first part of a 3-part study evaluated the effect of coloring agents on the physical properties of maxillofacial elastomers. METHODS AND MATE...

متن کامل

Color stability and colorant effect on maxillofacial elastomers. Part III: weathering effect on color.

STATEMENT OF PROBLEM Maxillofacial prostheses are serviceable for approximately 6 months, after which they need to be refabricated because of the deterioration of color and physical properties. PURPOSE This third article in a 3-part series evaluated the color stability of commonly used colorant-elastomer combinations as a result of exposure to weathering. METHODS AND MATERIAL Fifteen specim...

متن کامل

Color stability and colorant effect on maxillofacial elastomers. Part II: weathering effect on physical properties.

STATEMENT OF PROBLEM The clinical life of a maxillofacial prosthesis averages about 6 months, before it needs to be refabricated. Degradation of the color and physical properties of the prosthesis are the principle reasons for replacement. PURPOSE This second part of a 3-part in vitro investigation evaluated the change in physical properties of popular colorant-elastomer combinations as a res...

متن کامل

Evaluation of the effect of ultraviolet stabilizers on the change in color of a silicone elastomer following aging by three different methods: An in vitro study

Aim and Objective: To compare and evaluate the effect of ultraviolet (UV) stabilizers (UV absorbers [UVA] and hindered amine light stabilizers [HALS]) on the color change of a commonly used silicone elastomer subjected to aging by three different methods. Materials and Methodology: Four groups of 30 samples each were studied; Group A-Control, Group B-Silicone + UVA (Chimassorb 81), Group C-Sili...

متن کامل

Physical properties of a pigmented silicone maxillofacial material as a function of accelerated aging.

The effects of accelerated aging on a pigmented elastomer were evaluated by using a weathering chamber. Silastic 44210, a maxillofacial material with proven color and physical property stability, was chosen for pigmentation with 11 maxillofacial pigments. The values of ultimate tensile strength, maximum percent elongation, shear strength, Shore A hardness, and permanent deformation were determi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of prosthodontics : official journal of the American College of Prosthodontists

دوره 14 2  شماره 

صفحات  -

تاریخ انتشار 2005