CoY hexaferrite-PEEK composites for integrated and miniaturized RF components
نویسندگان
چکیده
CoY hexaferrite-filled PEEK (poly ethyl ether ketone) compositeswere synthesized to characterize the effect of hexaferrites on their dielectric, magnetic and thermal properties for wireless sensing and communication applications. Fillers were synthesized from solid-state reaction route and blendedwith the thermoplastic polymermatrix.XRDwas used to study the phase purity of the synthesised fillers. Impedance measurement showed permeability of*2 with a loss tangent of 0.04 and frequency stability of permeability up to 800 MHz for higher filler loading. Dielectric property measurements using parallel-plate capacitance showed that the composites can attain amaximumdielectric constant up to 8 and a loss tangent of 0.005. Thermo mechanical Analyser was used to characterize the coefficient of linear thermal expansion (CTE) of the composites. The measured CTE closelymatches that of organic substrates and copper, resulting in minimal CTE mismatch issues during processing and operation.VSMstudies revealed softmagnetic characteristics of the composites. The results suggest the potential of this polymer composite substrate for integrated RF modules with miniaturized embedded passive components.
منابع مشابه
Integration of RF passive components into semiconducting device through 3D capacitive coupling for application to fully-integrated MMIC
In this work, a 3D capacitive coupling structure employing periodic pattern was used for application to miniaturized on-chip passive components on MMIC (Monolithic Microwave Integrated Circuit). Unlike conventional periodic structure, the characteristic impedance of the 3D capacitive coupling structure was hardly dependent on frequency. Using the 3D capacitive coupling structure, RF passive com...
متن کاملNovel Nanostructured Passives for RF and Power Applications: Nanopackaging with Passive Components
Miniaturization of passive components, while mounting them close to the active devices to form ultrathin high-performance power and RF modules, is a key enabler for next-generation multifunctional miniaturized systems. Traditional microscale materials do not lead to adequate enhancement in volumetric densities to miniaturize passive components as thin films or thin integrated passive devices. W...
متن کاملModeling, Design, Fabrication and Demonstration of RF Front-End 3D IPAC Module with Ultra-thin Glass Substrates for LTE Applications
This paper demonstrates, for the first time, an integrated radio frequency (RF) front-end module (FEM) with precision matching circuits in ultra-miniaturized glass substrates for LTE applications. Through full-wave electromagnetic (EM) simulations, electrical performance of these glass-based long term evolution (LTE) packages is compared with traditional RF modules with surface mount devices (S...
متن کاملDevelopment and Investigation of Mechanical Properties of PEEK Fine Particles Reinforced UHMWPE Composites
In the present work, novel Ultra-high molecular weight polyethylene (UHMWPE) composites reinforced with 3wt. %, 6wt. %, 9wt. %, 12wt. % and 15wt. % PEEK particles are fabricated by using hot compression moulding technique and mechanical properties are investigated. Experiments were conducted as per ASTM standards to evaluate the properties of tensile, flexural, impact, and microhardness. The re...
متن کاملEnhancement of Carbon Nanotube Particle Distribution in PPS/PEEK/Carbon Nanotube Ternary Composites with Sausage-Like Structure
Carbon nanomaterial particles were selectively distributed in an incompatible and high-melting-temperature polymer blend interface, or in a particular phase, to obtain conductive composites. The composite products revealed poor morphology stability and mechanical performance due to processing several times. Poly(phenylene sulfide) (PPS) and poly(ether ether ketone) (PEEK) polymers with large di...
متن کامل