Chemical Mechanical Polishing Slurry for Tungsten in Ulsi with Large Particle Size Colloidal Silica Nano-abrasive
نویسندگان
چکیده
Silica sol nano-abrasives with large particle are prepared and characterized by TEM, PCS and Zeta potential in this paper. Results show that the silica sol nano-abrasives about 100nm are of higher stability (Zeta potential: -65mV) and narrow distribution of particle size. And then alkali CMP slurries for tungsten containing self-made silica sol nanoabrasives are prepared and applied. CMP results show that the removal rate has been improved to 367nm/min and the RMS of surface roughness has been reduced from 4.4nm to 0.80nm. In sum, one kind of alkali slurry containing 100nm silica sol for tungsten CMP is studied.
منابع مشابه
Chemical Mechanical Polishing by Colloidal Silica Slurry
Chemical Mechanical Polishing is a unique process enabling technology that allows chip makers to readily drive lithographic patterning steps to smaller dimensions, an ages old, “retro” technology related to glass polishing and metallographic finishing, thus enabling optical lithography to work. It represents a situation that is a true paradigm shift from the typical way in which technological a...
متن کاملPreparation and Polishing Properties of Spherical Porous Silica Abrasive
Problem statement: Abrasive is one of key influencing factors on the polished surface quality in Chemical Mechanical Polishing (CMP). Solid abrasives in CMP slurries are easy to cause polishing scratches. It is well known that reducing the hardness of abrasives would improve the polished surface quality. Therefore, the change in structure or shape of the abrasives means a change in polished sur...
متن کاملA Modeling Approach for Predicting the Abrasive Particle Motion During Chemical Mechanical Polishing
Chemical mechanical polishing (CMP) is a manufacturing process in which a wafer surface is polished by pressing it against a rotating pad that is flooded with slurry. The slurry itself is a fluid containing abrasive particles. Past experimentation has shown that the distribution of suspended particles in the slurry is significantly related to the distribution of material removal on the wafer du...
متن کاملEffect of Chemical Additive on Fixed Abrasive Polishing of LBO Crystal with Non-water Based Slurry
Non-water based fixed abrasive polishing was adopted to manufacture LBO crystal for nano precision surface quality because of its deliquescent. Ethyl alcohol was selected as the non-water based slurry solvent and ethanediamine, lactic acid, hydrogen peroxide was added in the slurry as a chemical additive, respectively. Effect of different additives with non-water based slurry on material remova...
متن کاملA statistical model for material removal prediction in polishing
This paper develops analytically a statistical model for predicting the material removal in mechanical polishing of material surfaces (MS). The model was based on the statistical theory and the abrasive–MS contact mechanisms. The pad-MS and pad-abrasive-MS interactions in polishing were characterised by contact mechanics. Two types of active abrasive particles in the polishing system were consi...
متن کامل