Inductive Current Sensor Based on Nanocrystalline Alloys
نویسندگان
چکیده
− In this paper are described the design and application of an inductive magnetic sensor based on nanocrystalline alloys. The sensor is adjusted for measurement and monitoration of currents with intensities from some microamperes to miliamperes. Its functional behaviour, performance and a specific application are described. One of the biggest advantages of this current sensor is its non-invasive characteristic, it means, is not required any direct contact with the circuit that is being monitored. It becomes appropriated for diverse applications where this requirement is necessary. An example of this sensor application is the metal oxide surge arresters leakage current monitoring.
منابع مشابه
FeCo-BASED SOFT MAGNETIC NANOCRYSTALLINE ALLOYS
The influence of microstructure on the magnetic properties is studied in series of of FeCoNbB, FeCoZrB and FeCoMoBCu amorphous and nanocrystalline alloys with different amount of crystalline phase.V arious thermomagnetic treatments have been used in order to tailor the soft magnetic characteristics of these alloys for potential applications. We report on a beneficial effect of both longitudinal...
متن کاملStructure and magnetic properties of „Fe0.5Co0.5...88Zr7B4Cu1 nanocrystalline alloys
The development of Fe73.5Si13.5B9Nb3Cu1 ~FINEMET! by Yoshizawa et al. and Fe88Zr7B4Cu1 ~NANOPERM! by Inoue et al. have shown that nanocrystalline microstructures can play an important role in the production of materials with outstanding soft magnetic properties. The FINEMET and NANOPERM materials rely on nanocrystalline a-Fe3Si and a-Fe, respectively, for their soft magnetic properties. The mag...
متن کاملStructural Inheritance and Redox Performance of Nanoporous Electrodes from Nanocrystalline Fe85.2B10-14P0-4Cu0.8 Alloys
Nanoporous electrodes have been fabricated by selectively dissolving the less noble α-Fe crystalline phase from nanocrystalline Fe85.2B14-xPxCu0.8 alloys (x= 0, 2, 4 at.%). The preferential dissolution is triggered by the weaker electrochemical stability of α-Fe nanocrystals than amorphous phase. The final nanoporous structure is mainly composed of amorphous residual phase and minor undissolved...
متن کاملEnhanced solid solution effects on the strength of nanocrystalline alloys
Solid solution strengthening in nanocrystalline alloys is studied using sputtered Ni–W as a model system. In the composition range of 0–20 at.% W, the sputtered alloys have a nanocrystalline structure with a grain size that is independent of composition. Nanoindentation of these alloys shows that solute addition increases strength to very high levels, almost in proportion to the solute content....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009