Supporting Information for Investigating the Superhydrophobic Behavior for Underwater Surfaces Using Impedance-Based Methods
نویسندگان
چکیده
Surface Tension. To properly direct the Cassie-Wenzel transition using variations in the surface tension of the aqueous solution (sol ) in contact with the SH film, we first established the behavior of sol at various mass fractions of ethanol (Figure S1). The surface tension of the liquid was as high as 71.3 mN/m for pure water (water ) and as low as 21.7 mN/m for pure ethanol (EtOH ), and continuous additions of ethanol to the aqueous solution resulted in a monotonic reduction of sol . The results show that large reductions in the surface tension of the liquid phase are achieved at low concentrations of ethanol, i.e.
منابع مشابه
Investigating the superhydrophobic behavior for underwater surfaces using impedance-based methods.
We have investigated the impedance behavior of immersed superhydrophobic (SH) polymethylene surfaces by tailoring the surface tension of the contacting liquid phase to gradually transition the surface from the Cassie to the Wenzel state. Control over the surface tension is accomplished by varying the ethanol content of the aqueous phase. To establish the mechanism of the transition, we imaged t...
متن کاملBio-inspired dewetted surfaces based on SiC/Si interlocked structures for enhanced-underwater stability and regenerative-drag reduction capability.
Drag reduction has become a serious issue in recent years in terms of energy conservation and environmental protection. Among diverse approaches for drag reduction, superhydrophobic surfaces have been mainly researched due to their high drag reducing efficiency. However, due to limited lifetime of plastron (i.e., air pockets) on superhydrophobic surfaces in underwater, the instability of dewett...
متن کاملScanning impedance microscopy (SIM): A novel approach for AC transport imaging
Scanning Impedance Microscopy (SIM) is one of the novel scanning probe microscopy (SPM) techniques, which has been developed to taking image from sample surface, providing quantitative information with high lateral resolution on the interface capacitance, and investigating the local capacitance–voltage (C–V) behavior of the interface and AC transport properties. The SIM is an ordinary AFM equip...
متن کاملScanning impedance microscopy (SIM): A novel approach for AC transport imaging
Scanning Impedance Microscopy (SIM) is one of the novel scanning probe microscopy (SPM) techniques, which has been developed to taking image from sample surface, providing quantitative information with high lateral resolution on the interface capacitance, and investigating the local capacitance–voltage (C–V) behavior of the interface and AC transport properties. The SIM is an ordinary AFM equip...
متن کاملFlexible conformable hydrophobized surfaces for turbulent flow drag reduction
In recent years extensive work has been focused onto using superhydrophobic surfaces for drag reduction applications. Superhydrophobic surfaces retain a gas layer, called a plastron, when submerged underwater in the Cassie-Baxter state with water in contact with the tops of surface roughness features. In this state the plastron allows slip to occur across the surface which results in a drag red...
متن کامل