THERMAL SPIKE MODEL OF TRACK FORMATION IN YBa2Cu3O7−x
نویسنده
چکیده
We consider a model based on the thermal spike concept for an explanation of latent track formation in YBa2Cu3O7−x single crystal. The model demonstrates some interesting peculiarities such as ®electronic quenching ̄ and existence of bifurcation points. Arguments why the energy spent on damage creation in the track should be equal to melting heat and why the so-called ®epitaxial regrowth ̄ is impossible are given.
منابع مشابه
THEORETICAL EVIDENCES FOR SUPERHEATING DURING TRACK FORMATION IN HIGH-Tc SUPERCONDUCTORS
At present the thermal spike description of heavy ion track formation in high-Tc superconductors is confronted with serious difˇculties caused by a high sensitivity of theoretical track radii to a small change of the electron diffusivity value. This sensitivity is caused by a bifurcation point found numerically in the model and resembles the impossibility of the classical gas description in the...
متن کاملاثر هیدراکسید آمونیوم بر فرآیند ساخت ابررسانای YBa2Cu3O7-x به روش سل- ژل
In this paper the effect of ammonium hydroxide addition to the solution of metallic oxide on sol gel preparation process of YBCO is studied with differential thermal analysis, thermal graviometry and X-ray diffraction. Two samples with and without ammonium hydroxide. Ammonium hydroxide prevents both barium nitrate precipitate during the gel preparation and also unwanted reaction as well as inc...
متن کاملساخت نانو بلورک‌های δ-7O3Cu2YBa به روش مکانوشیمیایی و بررسی دمای گذار ترکیبات -7O3Cu2YBa(x-1) + 2 xMnO (02/0 ،015/0 ،01/0 ،005/0 ،0 = x)
In this research, YBa2Cu3O7-d (0 < d < 1) nanocrystalite superconductor was prepared by mechanochemical alloying method. We synthesized YBa2Cu3O7-d via mixing the BaCO3, Y2O3, CuO powders and milling in SPEX 8000 for 5h with weight ratio of ball to powder 10:1 and steel balls of 11mm diameter, followed by heating for 4h at 850 ˚C. The superconductor phase formation process was completed with si...
متن کاملآستانهی ابعادی تشکیل نواحی دوقلویی در میکرونانو ذرات نمونه ابررسانای YBa2Cu3O7-x
Twinning is one of the main mechanisms of plastic deformation in crystals and its effect on the empirical properties has been important in materials science. Twin boundaries have been proved to be effective flux pinning centers in YBCO that increasing the critical current density. High-temperature superconductor YBa2Cu3O7-x (YBCO) nanoparticles were prepared by solid state alloying method. The ...
متن کاملEffect of Sintering Conditions on Microstructure and the Superconducting Properties of YBa2Cu3O7 x
YBa2Cu3O7-X tapes fabricated from precursor powder, were used to investigate the effect of sintering conditions on the microstructure. The sintering experiments were carried out in oxygen over the temperature range of 915-950ْC. Scanning electron microscopy was used to examine the sintered products. The result indicated a significant increase in densification and grain growth when the tapes were...
متن کامل