Application Note: Improved Method for Complex Modulus Estimation
نویسندگان
چکیده
In industrial products, vibration and the noise it creates is often a major parameter to be taken into account. It is therefore usually very important to measure the material properties i.e. stiffness and damping, that determine how vibrations are generated, transmitted and damped. This application note describes a method developed by Mr. Fuglsang Nielsen which will allow the standard non-resonant method for the determination of complex modulus to be used at higher frequencies than otherwise possible. It is also shown how this method can be implemented using the Multichannel Analysis System Type 3550.
منابع مشابه
Multivariate Estimation of Rock Mass Characteristics Respect to Depth Using ANFIS Based Subtractive Clustering- Khorramabad- Polezal Freeway Tunnels
Combination of Adoptive Network based Fuzzy Inference System (ANFIS) and subtractive clustering (SC) has been used for estimation of deformation modulus (Em) and rock mass strength (UCSm) considering depth of measurement. To do this, learning of the ANFIS based subtractive clustering (ANFISBSC) was performed firstly on 125 measurements of 9 variables such as rock mass strength (UCSm), deformati...
متن کاملAttitude Estimation of Nano-satellite according to Navigation Sensors using of Combination Method (TECHNICAL NOTE)
The purpose of this paper is to attitude estimation of Nano-satellite which requires navigation sensors data to less cost function and effection movement of Nano-satellite focus of the research is to using data of navigation sensors and methods to achieve the requirement of the attitude estimation. in this paper the following attitude estimation of the according to direction of sun of the Nano-...
متن کاملYoung s Modulus of Single and Double Walled Carbon Nanocones Using Finite Element Method(TECHNICAL NOTE)
In this paper a three-dimensional finite element (FE) model of carbon nanocones (CNCs) is proposed and used for obtaining Young\'s modulus of CNCs. In this model, stretching and bending forces between carbon atoms are simulated using truss elements in ANSYS software. Then the model is subjected to the tension and by obtaining the stiffness of the CNC and using elasticity theory, Young’s modulus...
متن کاملComplex Modulus of Pdms and Its Application in Cellular Force Measuremes
ABSTRACT Cellular contraction is often accompanied by oscillatory motion of several Hz. Accurate force measurement using Polydimethylsiloxane (PDMS) micropillar based bio-transducers calls for the appropriate material characterization of PDMS in the frequency domain. In this work, the complex modulus of PDMS was measured using a dynamic nanoindentation technique. An improved method was develope...
متن کاملPrediction of the deformation modulus of rock masses using Artificial Neural Networks and Regression methods
Static deformation modulus is recognized as one of the most important parameters governing the behavior of rock masses. Predictive models for the mechanical properties of rock masses have been used in rock engineering because direct measurement of the properties is difficult due to time and cost constraints. In this method the deformation modulus is estimated indirectly from classification syst...
متن کامل